How do I change the front brake pads on an Alfa Romeo 156?

Jack up car, wheel off, lever old pads back so caliper piston is all way in, Remove pad spring, disconnect pad wear indicator, Remove covers from mounting bolts, undo bolts, take off caliper, making sure not to strain the brake hose, take out pads, put new ones in, fitting reverse of removal...



Alternativly



http://www.alfa156.net/tech/Alfa156BrakeHow do I change the front brake pads on an Alfa Romeo 156?Very easy,

Take wheel off

undo clips on calipers and pop Pads out.



30 mins.How do I change the front brake pads on an Alfa Romeo 156?DO YOU REALISE HOW CHEAP PLACES LIKE KWIK FIT ARE YOU DON'T GET DIRTYHow do I change the front brake pads on an Alfa Romeo 156?if you dont already know you shouldnt be doing it !



beats me why people think oo we'l fix or car particlarly the brakes when they dont know what there doing.



would you attempt to rewire your house if you had to ask probably not i suspect like most people you'd say definatelty not i might get electrocuted .....well then dont mess with your brakes you might kill someone else not just yourself!!!!!!!!!

cute names for baby girl rats

hair straightening

Where can i go to change the brake pad?

I live L.A. - California. Can i buy the brake pads from the internet and go to the garage to let they change for me? or i have to buy from the garage?

Is Pep Boy good place to go?

Do you have any service centers recommend for me?Where can i go to change the brake pad?If you really want a professional job. Leave the %26quot;what kind of brake pads%26quot; decision up to the people that do hundreds of brake jobs every month. Take your car to Allen Tire Co. They're the most honest place I know in your area for brake service. There's one in Lakewood, Torrance, Arcadia and Downey. www.allentire.comWhere can i go to change the brake pad?If you have a midas there it's probably the cheapest at $79.95 per axle.Where can i go to change the brake pad?MOST shops won't replace customer supplied parts because they can't guaranty the quality or proper fit to the vehicle.



You're better off going to Midas, or something like them for the service.

Lifetime warranty.Where can i go to change the brake pad?if you buy brake pads from online but want a pro to install them just take em to the local garage to do it.

Places like Midas and such will probally throw a hissy fit since they want you to use thier pads.Where can i go to change the brake pad?buying pads and taking them to a mechanic is like walking in to a dinner with two eggs and asking the cook to fry them up for you yes pep boys is ok i'm from florida and i don't know what shops are where you liveWhere can i go to change the brake pad?If you do that you'll get double charged for the installation and no warranty, at least that's what I'd do to you.Where can i go to change the brake pad?The pads are not hard to replace at all. If you are mechanically inclined and like to work on your cars then you should be able to do it yourself. As far as you buying them and then taking them to a shop to have them put them on for you. More then likely the shop will say no because it comes down to money. But they may say yes and charge you a little bit extra.

How do I change the front brake pads on a 2000 Kia Sportage 2WD?

Service and Repair

Notes



INSPECTION





Raise vehicle and support the frame.

Remove the front wheel.

















Look through side of caliper to visually check pad thickness. Also check to see if wear indicator is touching the disc assembly. Always replace pads if wear indicator touches rotor. NOTICE: Hydraulic fluid will damage paint. If fluid gets on a painted surface, wipe off immediately.

REMOVAL



















Remove the two caliper assembly bolts and pull caliper from disc.

















Remove the brake pads from the adapter.

















Remove the two adapter mounting bolts and then remove the adapter.

















Remove the two screws and then remove the disc assembly.

INSPECTION







Check for oil or grease on the pads or on the disc assembly.

















Check pad lining thickness. If below minimum, replace pad. Minimum Thickness: 0.08 inch (2.0 mm) New Thickness: 0.37 inch (9.5 mm)

Visually check disc for damage or wear.

Measure disc thickness. If below minimum, replace disc assembly. Standard: 0.94 inch (24 mm) Minimum: .088 inch (22.4 mm)















Visually check the piston seal for holes, tears, or other damage. Replace using piston repair kit.

INSTALLATION















Place disc assembly on front axle and install the disc screws. Check the disc runout from the outer surface. Runout: 0.004 inch (0.10 mm) at 4.7 inch (12 cm) from disc center

Check that anti-rattle clip is on the adapter and then install the adapter and bolts. Tighten the bolts to 17 ft. lbs. (23.5 Nm)

Place brake pads on adapter.















Using a C-clamp or similar device, push the caliper piston into the caliper.

Place the caliper assembly in position on the disc assembly. Tighten the bolts to 72 ft. lbs. (98 Nm)



























Install the tire and .

Pump the brake pedal three times and then check brake movement while rotating the tire.





















漏 2007 ALLDATA LLC. All rights reserved.

Terms of UseHow do I change the front brake pads on a 2000 Kia Sportage 2WD?you jack it up ,make sure its safe,and remove the front wheels,and remove the caliper bolts and pull the calipers of of it,press them in real slowly with a c-clamp,and check the rotors to see if there bad ,if there alright put the new shoes in place and replace the calipers on it,and replace the bolts,tighten them good ,install the wheels ,and test drive it,and your done,good luck,i hope this help,s.

At what minimum of thickness do you change a nissian pathfinder brake pads?

not the maximum, but minimum thickness, then you replace it.At what minimum of thickness do you change a nissian pathfinder brake pads?They should have a piece of steel (called a squealer) on the corner of the brake pad (usually the pad on the inside) and when the brake pad wears down to that point it makes a noise. You can go to an auto parts store look at a set of new brakes and measure the distance from the squealer to the brake backing and that will tell you, or you can take off the one from your car and check.At what minimum of thickness do you change a nissian pathfinder brake pads?hmm im not sure but i guess if it starts to squeek it needs changingAt what minimum of thickness do you change a nissian pathfinder brake pads?should be an indicator on the pads that will make a high pitched or squeaking noise when change time has comeAt what minimum of thickness do you change a nissian pathfinder brake pads?change them if they squeek, look it up on ask.com

How do i change Disc Brake Pads on a kymco atv?

a kxr or a mongoose at the us :) plz help!How do i change Disc Brake Pads on a kymco atv?Just start doing it, and I'm sure you'll succeed.

My car takes a long time to start after air filter and brake pad change

I just changed out my brake pads and air filter, and now my car is acting really weird when I try and start it.



It barely turns over for about 10 seconds (sounds like a dead battery at first), then it starts turning over (it does this for about 5 seconds) and then eventually it starts. Once it's started, everything seems to run as normal.



It was starting just fine yesterday. COuld I have damaged something that would have caused this while changing brake pads or the air filter?



Thanks for your help.My car takes a long time to start after air filter and brake pad changeDoes not sound likely you could have damaged something. Unless you got debris into the air intake system which you could have clogged the throttle body. Thats just a possibility.



Maybe a coincidence but I would check out your battery at autozone or some automotive store with the special tool to check cold cranking amps.



Maybe your plugs and wires are due for replacement, this also causes slow cranking.

dvd movies case

vb

Step by step procedure to change brake pads 2001 cabrio?

it is a very fastidoius way to teach you the step by step procedures to change your brake pads why not go to the library and get the right car manual and you can follow it by yourself but i will not encourage you to do it because brake is the most important part of your car and if you dont have the right knowhow it is very dangerous to you and people around you and i forget you need the right tools to changed the brake properly so please let the mechanic check it for you and they can check your brake system completely

goodluck!!Step by step procedure to change brake pads 2001 cabrio?step 1. take your car to a brake shop.

step 2. pay them



thats the easiest way but if you really want me to go through and make you a manual on how to do it let me know ( but if you take it to the right shop its only gonna cost about 70 bucks for both fronts)