Tuesday, October 25, 2011

How do I change the front brake pads on an Alfa Romeo 156?

Jack up car, wheel off, lever old pads back so caliper piston is all way in, Remove pad spring, disconnect pad wear indicator, Remove covers from mounting bolts, undo bolts, take off caliper, making sure not to strain the brake hose, take out pads, put new ones in, fitting reverse of removal...



Alternativly



http://www.alfa156.net/tech/Alfa156BrakeHow do I change the front brake pads on an Alfa Romeo 156?Very easy,

Take wheel off

undo clips on calipers and pop Pads out.



30 mins.How do I change the front brake pads on an Alfa Romeo 156?DO YOU REALISE HOW CHEAP PLACES LIKE KWIK FIT ARE YOU DON'T GET DIRTYHow do I change the front brake pads on an Alfa Romeo 156?if you dont already know you shouldnt be doing it !



beats me why people think oo we'l fix or car particlarly the brakes when they dont know what there doing.



would you attempt to rewire your house if you had to ask probably not i suspect like most people you'd say definatelty not i might get electrocuted .....well then dont mess with your brakes you might kill someone else not just yourself!!!!!!!!!
  • cute names for baby girl rats
  • hair straightening
  • Where can i go to change the brake pad?

    I live L.A. - California. Can i buy the brake pads from the internet and go to the garage to let they change for me? or i have to buy from the garage?

    Is Pep Boy good place to go?

    Do you have any service centers recommend for me?Where can i go to change the brake pad?If you really want a professional job. Leave the %26quot;what kind of brake pads%26quot; decision up to the people that do hundreds of brake jobs every month. Take your car to Allen Tire Co. They're the most honest place I know in your area for brake service. There's one in Lakewood, Torrance, Arcadia and Downey. www.allentire.comWhere can i go to change the brake pad?If you have a midas there it's probably the cheapest at $79.95 per axle.Where can i go to change the brake pad?MOST shops won't replace customer supplied parts because they can't guaranty the quality or proper fit to the vehicle.



    You're better off going to Midas, or something like them for the service.

    Lifetime warranty.Where can i go to change the brake pad?if you buy brake pads from online but want a pro to install them just take em to the local garage to do it.

    Places like Midas and such will probally throw a hissy fit since they want you to use thier pads.Where can i go to change the brake pad?buying pads and taking them to a mechanic is like walking in to a dinner with two eggs and asking the cook to fry them up for you yes pep boys is ok i'm from florida and i don't know what shops are where you liveWhere can i go to change the brake pad?If you do that you'll get double charged for the installation and no warranty, at least that's what I'd do to you.Where can i go to change the brake pad?The pads are not hard to replace at all. If you are mechanically inclined and like to work on your cars then you should be able to do it yourself. As far as you buying them and then taking them to a shop to have them put them on for you. More then likely the shop will say no because it comes down to money. But they may say yes and charge you a little bit extra.

    How do I change the front brake pads on a 2000 Kia Sportage 2WD?

    Service and Repair

    Notes



    INSPECTION





    Raise vehicle and support the frame.

    Remove the front wheel.

















    Look through side of caliper to visually check pad thickness. Also check to see if wear indicator is touching the disc assembly. Always replace pads if wear indicator touches rotor. NOTICE: Hydraulic fluid will damage paint. If fluid gets on a painted surface, wipe off immediately.

    REMOVAL



















    Remove the two caliper assembly bolts and pull caliper from disc.

















    Remove the brake pads from the adapter.

















    Remove the two adapter mounting bolts and then remove the adapter.

















    Remove the two screws and then remove the disc assembly.

    INSPECTION







    Check for oil or grease on the pads or on the disc assembly.

















    Check pad lining thickness. If below minimum, replace pad. Minimum Thickness: 0.08 inch (2.0 mm) New Thickness: 0.37 inch (9.5 mm)

    Visually check disc for damage or wear.

    Measure disc thickness. If below minimum, replace disc assembly. Standard: 0.94 inch (24 mm) Minimum: .088 inch (22.4 mm)















    Visually check the piston seal for holes, tears, or other damage. Replace using piston repair kit.

    INSTALLATION















    Place disc assembly on front axle and install the disc screws. Check the disc runout from the outer surface. Runout: 0.004 inch (0.10 mm) at 4.7 inch (12 cm) from disc center

    Check that anti-rattle clip is on the adapter and then install the adapter and bolts. Tighten the bolts to 17 ft. lbs. (23.5 Nm)

    Place brake pads on adapter.















    Using a C-clamp or similar device, push the caliper piston into the caliper.

    Place the caliper assembly in position on the disc assembly. Tighten the bolts to 72 ft. lbs. (98 Nm)



























    Install the tire and .

    Pump the brake pedal three times and then check brake movement while rotating the tire.





















    漏 2007 ALLDATA LLC. All rights reserved.

    Terms of UseHow do I change the front brake pads on a 2000 Kia Sportage 2WD?you jack it up ,make sure its safe,and remove the front wheels,and remove the caliper bolts and pull the calipers of of it,press them in real slowly with a c-clamp,and check the rotors to see if there bad ,if there alright put the new shoes in place and replace the calipers on it,and replace the bolts,tighten them good ,install the wheels ,and test drive it,and your done,good luck,i hope this help,s.

    At what minimum of thickness do you change a nissian pathfinder brake pads?

    not the maximum, but minimum thickness, then you replace it.At what minimum of thickness do you change a nissian pathfinder brake pads?They should have a piece of steel (called a squealer) on the corner of the brake pad (usually the pad on the inside) and when the brake pad wears down to that point it makes a noise. You can go to an auto parts store look at a set of new brakes and measure the distance from the squealer to the brake backing and that will tell you, or you can take off the one from your car and check.At what minimum of thickness do you change a nissian pathfinder brake pads?hmm im not sure but i guess if it starts to squeek it needs changingAt what minimum of thickness do you change a nissian pathfinder brake pads?should be an indicator on the pads that will make a high pitched or squeaking noise when change time has comeAt what minimum of thickness do you change a nissian pathfinder brake pads?change them if they squeek, look it up on ask.com

    How do i change Disc Brake Pads on a kymco atv?

    a kxr or a mongoose at the us :) plz help!How do i change Disc Brake Pads on a kymco atv?Just start doing it, and I'm sure you'll succeed.

    My car takes a long time to start after air filter and brake pad change

    I just changed out my brake pads and air filter, and now my car is acting really weird when I try and start it.



    It barely turns over for about 10 seconds (sounds like a dead battery at first), then it starts turning over (it does this for about 5 seconds) and then eventually it starts. Once it's started, everything seems to run as normal.



    It was starting just fine yesterday. COuld I have damaged something that would have caused this while changing brake pads or the air filter?



    Thanks for your help.My car takes a long time to start after air filter and brake pad changeDoes not sound likely you could have damaged something. Unless you got debris into the air intake system which you could have clogged the throttle body. Thats just a possibility.



    Maybe a coincidence but I would check out your battery at autozone or some automotive store with the special tool to check cold cranking amps.



    Maybe your plugs and wires are due for replacement, this also causes slow cranking.
  • dvd movies case
  • vb
  • Step by step procedure to change brake pads 2001 cabrio?

    it is a very fastidoius way to teach you the step by step procedures to change your brake pads why not go to the library and get the right car manual and you can follow it by yourself but i will not encourage you to do it because brake is the most important part of your car and if you dont have the right knowhow it is very dangerous to you and people around you and i forget you need the right tools to changed the brake properly so please let the mechanic check it for you and they can check your brake system completely

    goodluck!!Step by step procedure to change brake pads 2001 cabrio?step 1. take your car to a brake shop.

    step 2. pay them



    thats the easiest way but if you really want me to go through and make you a manual on how to do it let me know ( but if you take it to the right shop its only gonna cost about 70 bucks for both fronts)

    How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?

    Does the ABS need to be disconnected? Never changed brakes on a vehicle w/ ABS.How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?no u dont have to disconnect the abs just do the pads as u would anyother car .......1. take off tires 2. use a big screw driver or pry bar and colapse the caliper piston by inserting it in the opening on top of the caliper, be careful not to scratch the rotor with the screw driver or pry bar, ans do not open any lines before doing this or at any time during the job 3. take off caliper by loosening the 2 bolts on back of caliper 4. remove caliper from rotor and remove brake pads 5. clean the hardware on the caliper and lube it with either a light coat of grease or non drying silicone 5 if u use non drying silicone then apply it to the new pads( prevents the squeaking noises brakes make 6 u may have to finish colapsing the caliper piston if u do use a screw driver and place it on the edge of the piston and push it in the caliper 7. then place the caliper back on the rotor lining up the holes in back for the retaining bolts on the caliper 8. do other side when one side is done.... dont compress both caliper pistons at the saome time it will overflow the master cylinder ..... good luckHow to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?Unbolt the caliper and replace the pads. Remove the caliper mounting bracket if the rotors are to be removed and machined.How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?p.s. Dont forget to take off the brake master cylinder cap to relieve the pressure when you compress the caliper piston with the screwdriver. Or, if you have a big c-clamp, wait till the caliper is off and compress it then. Go slowly so you dont spray brake fluid on your hood and fenderwells, cause it will eat the paint off, guaranteed!!

    Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?

    hi guys, today i went to JUST BRAKES after listening to their ad 4pad/99$..but after getting their they got my signature to change the pads and after checking the brakes they said yr rear pads are good but we need to change yr all the rotors ,calibers blah blah and at last he gave me an estimate of 950$..since almost i had my 1st heart attack i refused to do it and asked them to change only my front pads since they got signature . so guys wat should i do now whether go to my mechanic who i trust much or to do the changes when it brakes down. as far as know am not hearing any type of sounds when i apply the brakes even before or now..pl help me out..Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?There is a minimum thickness specification that determines weather or not your rotors can be reused. Find out what it is and have an honest mechanic measure them with a micrometer. If your brakes aren't squeaking, grinding, pulsating, or leaking their probably okay. $950 is to much for a simple brake job in my opinion.Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?Drive the car til you hear the brake pads startin to squeal then take the car to a reputable mechanic and have the repairs done there. Looks like you already have a reliable mechanic. Good luck !Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?get a book a few simple handtools and do it yourself your getting scammedWhether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?well rarely do calipers go bad. if they do its usually the way you brake wether you brake really hard alot tht can take its toll especially where the brake lines are connected to them. but unless u hav let it sit around or ur a new owner and the previous tore it up b4 you bought it tht you wont need them. rotors they hav a tendency to go bad but once again tht jus tdepends on the way you drive the car. i doubt you need rotors unless your brake pads hav an uneven wear pattern then it is prolly needed. for now stick wit the brake pads and unless you commute or go on long trips a lot more than about 20 or 30 miles dont worry bout gettin all tht done. it jus sounds lik they are trying to get your money... i drive like a nascar driver almost all the time and i drive big vehicles lik i hav a truck and a van so i kno tht braking systems can take a beating and a car lik tht wont hav any problems...

    Is It Cheaper to change my front brake pads or pay someone to do it?

    Front left wheel base on car is squealing I think it needs front brakes but was wondering how hard and how much cheaper it would be to do it myself.Is It Cheaper to change my front brake pads or pay someone to do it?It's not hard, but if you have never done it, remember that your brakes are what keep you from running into other innocent people who are not too cheap to take care of THEIR brakesIs It Cheaper to change my front brake pads or pay someone to do it?It's always cheaper to do it yourself. If you know how to do it, do it yourself, it's not that time consuming or difficult.Is It Cheaper to change my front brake pads or pay someone to do it?it's not hard and it would be a lot cheaper for you to do it your selfIs It Cheaper to change my front brake pads or pay someone to do it?It's not hard to do and much cheaper to do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?you better do it yourself if you know how. it usually costs about $100 per pad if you pay a professional.Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you're doing then it's way cheaper to do it yourself but if you don't take it somewhere to get it fixed... you might break something or not do it right then it'll cost you more to get it all fixed...Is It Cheaper to change my front brake pads or pay someone to do it?Do it yourself. It's not very hard (find a friend that knows a bit about cars and get them to help) it took me about an hour to an hour and a half and cost me a total of about $20 (i didn't have to do my rotors) it would have cost an easy $80 to pay someone to do it, so I made nearly $50 an hour doing the job myself.



    GregIs It Cheaper to change my front brake pads or pay someone to do it?Assuming you haven't let it wear to the point that the rotors need to be resurfaced or replaced, and you have some idea of what you are doing, it's always cheaper to buy the parts and do it yourself rather than pay for the labor. Do you have the needed tools?Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you are doing and have the right tools than do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?If you know how to do it, it's cheaper to do it yourself. If you don't, your life, and the lives of other could hang in the balance. The extra $200 max just isn't worth that.Is It Cheaper to change my front brake pads or pay someone to do it?Probably the easiest job on a car.Is It Cheaper to change my front brake pads or pay someone to do it?From the stand point of brakes and pads it's cheaper to do it yourself if you know what you are doing. Changing brakes is a relatively easy job, but you have to look at your initial start up costs.



    1. Need a good set of Jack Stands! Never work on a vehicle that is off the ground with out them! $20



    2. Good set of tools. Don't get cheap tools, they only lend themselves to hurting yourself. You can get an inexpensive Craftsman ratchet and socket set at Sears for $50



    3. A large C-Clamp. Again I go with craftsman. $30



    4. I like having a hydraulic jack, but you can use the jack that comes with the car. $25.



    5. Brake Pads typically $20-$30 (Get the lifetime wear warranty ones from autozone and it will be the last set of pads you purchase if you don't go metal to metal. They don't honor the warranty if you go metal to metal)



    6. I would advise turning the rotors at a machine shop or auto parts store. Typically $20 ($10 per rotor is pretty standard)



    So your initial start up costs is approximately for the first brake job. $175



    Each additional time you do the brakes on that vehicle yourself will cost you only $20 (the cost to get the rotors turned).



    Can definitely save you money in the long run!



    However if you don't know what you are doing. Killing your self in an accident or hitting something/someone is never worth it.Is It Cheaper to change my front brake pads or pay someone to do it?Doing anything yourself is always a tradeoff. Yes, it's probably less expensive, tho not as much as you might expect. That's not figuring in your time. A mechanic can probably do the job in under an hour. How much time are you willing to spend? If you've never done it before, it might take you an entire day.



    Then too, there's the cost of tools if you don't have the proper ones for your car.



    And, there's the issue of liability. If you do the job and don't do it properly, there's no one to blame but yourself. Your insurance company might look at it that way too if you get in an accident.



    I've done it a few times and, for me, it's not worth the aggravation. Of course, if you like to work on cars, that's another consideration.Is It Cheaper to change my front brake pads or pay someone to do it?...and you magically have a brake lathe hiding around in your garage to turn your rotors?? go to a repair shop! if your brakes fail because you wanted to save $20, it's not just you you're endangering... it's everyone else on the road as well. good luck!Is It Cheaper to change my front brake pads or pay someone to do it?I agree with all on the opinion that it is cheaper to do your self if you have the tools and knowledge. However being a certified mechanic, I advise you to take it to a repair shop or a person who knows what to do. There is much more to a brake system than just swapping pads and having the rotors machined. If you have an ABS system, it could get damaged if you don't do it right. I have seen several minor $150 brake jobs turn into $500-$2000 jobs because of not doing it correctly.

    How do I change, my front brake pads on my 2002 jeep grand cherokee limited. which one bolt/allen screws?

    Go to your local auto parts store and purchase a Chilton's Repair Manual. In the Brake section, it gives the step by step procedure for removing disc pads or shoes for front and rear brakes. To install, reverse the procedure.
  • extension to sqltableprovider
  • xp
  • I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??

    I have a 1995 Honda Civic EX by the way. The last time the brakes were changed was shortly before I bought the car from a private party last April of 2007. I haven't noticed problems stopping but then again I don't want to wait until they get to be paper thin to replace them either. I'd like to keep myself and anyone in my car safer with brake pads changed on a regular schedule just like changing my oil and filter. Thanks!I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??the fronts really do most of work i'd change every 10,000 miles do the back at same time hard to do... maybe 1/2 hour each wheel. do fronts first! get a friend to helpp.. it's good for convesation at least!I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Hi, brakes change will depend on your braking habit. Hard braking means you will wear them out more. Gentle and gradual braking will conserve your brake pads. You can drive 100,000miles and hit your brakes once and they will be as good as new.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??City driving with lots of stop and go will wear brakes more than open highway driving, so the type of driving will play a part in the wear of your brakes.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??For disc brakes, you can see the brake linings on the brake pads and I will consider changing them in pairs on the wheels when the linings wore down to about 1/16th of an inch. You can still have effective braking with them still.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Your vehicle drive train will also wear brakes more. If you have a front-wheel drive car, the front brakes will tend to wear faster due to having stop heavier momentum, likewise the rear brakes for rear-wheel drive. Take a look at the brake pads for best gauge to replacing them.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??If there is no damage other than normal wear, they should last at leat 10 thousand miles. and possibly even more i have 15 000 on mine. and i want to replace thms soon. they are allright they are just worn down too low to suit me. This has been 5 years for me. That would be about 3000 miles a year for me.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Most if not all cars with disc brakes have a little metal plate which rubs against the disc when you are getting to the stage where they need to be replaced, the wear indicator will make a screeching sound when it's time to replace the pads, my last set of pads lasted me 100,000 km's.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Disc brake pads have a sensor built in on them. It all depends on how much you drive your car. If your discs are smooth, your pads will last for a very long time. Listen for a scraping sound that will usually go away when you hit the brakes.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Have your tires rotated on a regular basis by someone that knows what they are doing.Each time they (or you), can visually inspect the pads and know how much pad you have leftI have disc brakes in the front and back. How often (miles or time) should I change the brake pads??A good breakpad should last up to 100,000 miles.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??On all autos, with disk brakes, the brake pad has a flexible metal tab, that creates a %26quot;skreching/rubbing%26quot; noise when the thickness of the pad becomes unsafe. In most cars, the front wheels/brakes will wear faster than the rear pads. The amount that the car is used, whether in the city with a lot of stop and go traffic, or in the country, with long open driving condition, will determine the frequency of need to %26quot;re-do your brakes%26quot;. Of importance, if you do hear the sound of scrapping/rubbing noise, if allowed to go too long, will cause your brake rotors to wear abnormally. Making additional cost of brake repair. Usually when detected early, changing the pads frequently will prolong the life of your rotor, and even the calipers holding the pad will last longer. Your oil, and engine maintenance will be required a lot more often than the need to replace your brake pads. Most auto service centers, will provide a courtesy walk around inspection of your car when you take it in for your routine oil change service. A sign of wear of your brakes, is sometime seen as a black dust/powder showing through your wheels.

    Changing brake pads pulling off caliper?

    when ever i try to change brake pads its either hit or miss....

    sometimes when i pull off caliper the pistons and worn pads are pushed to the rotor making it impossible to slide in the new pads....

    please note that i dont want to use a method that would break any seal around piston



    how do i push em back or prepare my car for the maintenance?Changing brake pads pulling off caliper?Use a C-clamp and press on the old brake pad ( pushes the piston back )

    you first MUST remove the 2 caliper bolts and pull the caliper off the rotor. You do not have to remove the brake line though... Just try to balance the caliper on top of the rotor while working with it to push the piston back.. No brake bleeding required this wayChanging brake pads pulling off caliper?In an automotive garage they usually have a tool for pushing the caliper pistons back into the caliper. It looks like a backwards pliers that pushes out with two plates on each side. This essentially pushes both sides of the caliper back in easily. You could try to find one of these or you can use channel locks to push the calipers back in a little at a time. Vise Grips will also work great if you have these tools. If not you can always try to use anything like a screwdriver or something like that to simply push the calipers back in.Changing brake pads pulling off caliper?I usually pry open the caliper a little with a big screw driver to release some of the pressure and then the caliper and pads come right off. Open the break fluid container in the engine compartment and get ready to soak up the overflow.

    It is very hard to take them off if you do not release some of the pressure.Changing brake pads pulling off caliper?I use a 6 inch c-clamp. Leave one of the old pads in the Caliber against the piston and Tighten slowly, and do not be alarmed with fluid that might over flow from the master cylinder.Changing brake pads pulling off caliper?you use a c-clamp to push the piston back into its bore so the new pads will go over the rotor.you won,t break the seal. the seal is up inside the piston. what you see on the outside is the dust boot.

    How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?

    I need to know how to get the calipers off of a 1999 Mercury marquis so I can change the brake pads and have the rotorys turned.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?Assuming you are referring to the front brakes, remove the two 13mm caliper bolts that secure the caliper to the caliper bracket. Using a screwdriver, gently pry the caliper off the pads. Using a 1/2%26quot; drive socket with a johnson bar, remove the two 18mm bolts that secure the brake pad and caliper support bracket to the steering knuckle. Remove the brake rotor. Repeat steps for other side. Installation is the reverse of removal. Hope this helps.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?after removing the wheel you will see two 11/16 bolts right on the front side of the caliper remove them and the caliper will come off.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?Remove tire and you will see big bolts on inside remove bolts , Rotor should come right off, To go back on remove master cylinder cap or loosen with a C-clamp depress piston all the way back it has to all the way back replace rotor replace caliper tighten bolts , hope this helps.

    How to change brake pads on chevy cavalier?

    1989 chevy cavalierHow to change brake pads on chevy cavalier?Get a repair manual for $20. It will give you step by step instructions. You will need a TORX socket to remove the caliper bolts, a C-Clamp to push the piston back in the caliper. Unless you are going to have the rotors resurfaced, I'd replace those at the same time, they are pretty cheap for those model cars.How to change brake pads on chevy cavalier?go to auto zone and buy a haynes manual for the car it will go step by stepHow to change brake pads on chevy cavalier?a haynes manuel will show you step by step how to do it. first after you have the wheel off and the car is secure take a c-clamp and push the piston back into its bore, if you have torx bolts in the caliper then you need a torx bit ( maybe a T-50), take the bolts out, change the pads, put the caliper back on and tighten the bolts, spray it down with some brake cleaner and go to the other side.

    Is there any online information on how to change break pads?

    online information or diagrams on how to change brake pads and turn rotars on a 1995 pontiac sunfire also any information on how to change the spark plugs and spark plug wires on a pontiac sunfire 1995 ? the engine is quite awkward the plugs and wires seem to be hard to locate and reachIs there any online information on how to change break pads?Go to www.advanceautoparts.comand look under %26quot;know how articles%26quot;.Is there any online information on how to change break pads?Spend the $20 %26amp; buy a Haynes or Chilton manual for you vehicle. It's money well spent %26amp; you will have it for future reference.

    _ _ _Is there any online information on how to change break pads?I can change your brake pads. ^_^ I've done the procedure hundreds of times.Is there any online information on how to change break pads?http://www.autozone.com/addVehicleId,199





    good luck...Is there any online information on how to change break pads?Oh man it is easy to do. Once you do one it becomes clear how to do others atleast for disk brakes. I pressume that is what you have wince you spoke of turning rotors.



    Go online do a search for changing brake pads or join a forum for your vehicle.Is there any online information on how to change break pads?First things first.



    The article I'm giving you is a general how-to on how to do your brake pads. Turning your rotors is something you can't do at home. You need to take the rotors (which should come off in the process of changing the brake pads) to a shop and ask them IF they can be turned (if they have been turned before or if they are warped, you may not be able to turn them).



    As for the plugs and wires, just follow your plug wires to the end, and voila! There are the plugs. Do those one at a time, and make sure you gap your plugs to the recommended gap. If you don't know the proper gap, you can ask your local parts guy for the proper gap, or look at the manufacturers label under the hood. Somewhere on there is a proper gap setting.



    That being said, it is easier to go down to your parts place and get a Chilton's or Haynes manual. It will have the proper procedure to do both jobs, along with other handy tips to keep your car going.Is there any online information on how to change break pads?Whats to know? To change the brake pads, remove the wheel, un-bolt the caliper (just 2 bolts), lift it off, push in the caliper piston, remove old pads, insert new pads (after lubing them appropriately) and re-install. Same as just about any pad slap on any car. Litterally after removing the wheel there are only 2 bolts to deal with.



    The spark plugs and wires are also no big wup either. Just remove the top cover off the engine and everything is right there. If its a 2.4 DOHC (Quad 4) engine it will not have spark plug wires but rather hard boots that are built right into the cover. These are a frequent source of problems and should be replaced at the same time as the plugs.



    If its a 2.2 engine you might as well replace that leaking valve cover gasket as long as you are in there. That's easy too, something like 11 or 12 bolts and she comes right out.
  • web hosting domains
  • connect hdd to pc
  • Do you need to cut the rotors everytime you change your brake pads?

    I was told that you need to cut the rotors everytime you change the brake pads even if they are not wore..I just had my brakes look at .They told me no matter I have to cut them .I have 28,000 miles I need to change the pads soon on the back and 1/2 left on the front.2009Do you need to cut the rotors everytime you change your brake pads?Rotors should only be cut once. 28,000 miles seems to be too soon for pads to wear out.Do you need to cut the rotors everytime you change your brake pads?28,000 miles is WAY too soon for rear brakes... rear brakes only do 5-10% of braking, when you step on the brakes, the weight shifts to the front, so your front pads do most of the work.... rear brakes can last to 100k miles. But to answer your question, yes the rotors need to be cut everytime you change pads, if you didnt, the pads would be smooth, while the rotors are unven, causing elss surface area for the pads and rotors to meet

    Which place is good to change the brake pads?

    The place that has a nice service and I can trustWhich place is good to change the brake pads?I've been to Meineke Muffler/Brakes in a couple of different states, and been very pleased with their work. What I do is look up a shop on Yahoo and see if there is a customer rating for them, and based upon what customers have said, I'll decide. Here in my current town, Meineke passed that test and did a fantastic job.Which place is good to change the brake pads?take it to auto zone,they will hook up the scan tool and check for codes,tell them that my ex husband sent you and they may even fix it for free,or you can buy a haynes manual for $20 and it will show you everything,don't forget to change your air and fuel filters too,good luck,hope this helpsWhich place is good to change the brake pads?Changing brake pads is done well at most places that sell tires. Machine the rotors too.

    How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?

    My passenger side rear drum brake has recently started grinding which I assume is it telling me the pads are worn. I am considering attempting to change the pads myself and wanted to know the complexity of the task, before I continue or pay a mechanic (over the odds) for the work.



    I am fairly confident at most smaller DIY jobs.



    ThanksHow easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?Absolutely simple %26amp; straightforward job. Get yourself a Haynes manual - well worth it.

    And drums have shoes; discs have pads.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?you can get it dont easliy the only hard part will probably be the rust and the rear caliper piston on which you will have to turn counter clockwise and push in at the same time to get the piston to return to allow the calpiter back on to the rotorHow easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?perfectly diy....

    but you mention pads and drums,meaning disc and shoes...it may have both depending on the design...best bet is some exploratory examination first[split and look] and go from there....shoe self adjusters can be a pain but that's about it...basic tools only.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?as a mechanic myself id advise you to get a mechanic to do it. brakes being an important thing in helping to slown down the car and not kill any one.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?get a haynes or chiltons book at autozone for 13 bucks, drum brakes are not as easy as disk especially adjusting them, the book will show you step by step with pictures, and a lot cheaper than a mechanic.

    Three lights on after brake pad change ?

    We changed our brake pads in the front and brake seems to work fine but three lights came on engine light, traction control, and VSC. Im eventually going to take it to the shop but need to drive them tommorow for at least 6 hours staright. Should I be concerned ? Car is RX300 btw.Three lights on after brake pad change ?If it drives okay you don't need to be concerned, but you won't have anti-lock (only normal braking) and the stability control won't work. You have some sort of sensor problem on one of the front wheels - there is an ABS sensor on each.



    Because the engine light is on, you won't know if any other engine/emission related problems pop up. That is no big risk, but just don't play the game too long. A week is no big deal, a year is a bigger deal.Three lights on after brake pad change ?It sounds like they unplugged the wheel speed sensor and forgot to plug it back in, or damaged it during the job. If that's the case, your car is still perfectly safe to drive, just get it checked out soon.Three lights on after brake pad change ?A few friends of mine had the same problem but I'm not sure if it would work for you as well, check to see if the hose behind my air filter was disconnected. (After checking it disconnect the battery for 10mins and reconnect) Most said the Lights go away after that... Worth a shot?Three lights on after brake pad change ?Worst case scenario is that you don't have ABS. Big whoop. ABS isn't really needed if you drive safely anyways.





    Still safe to drive, don't worry about it.