Tuesday, October 25, 2011

How do I change the front brake pads on an Alfa Romeo 156?

Jack up car, wheel off, lever old pads back so caliper piston is all way in, Remove pad spring, disconnect pad wear indicator, Remove covers from mounting bolts, undo bolts, take off caliper, making sure not to strain the brake hose, take out pads, put new ones in, fitting reverse of removal...



Alternativly



http://www.alfa156.net/tech/Alfa156BrakeHow do I change the front brake pads on an Alfa Romeo 156?Very easy,

Take wheel off

undo clips on calipers and pop Pads out.



30 mins.How do I change the front brake pads on an Alfa Romeo 156?DO YOU REALISE HOW CHEAP PLACES LIKE KWIK FIT ARE YOU DON'T GET DIRTYHow do I change the front brake pads on an Alfa Romeo 156?if you dont already know you shouldnt be doing it !



beats me why people think oo we'l fix or car particlarly the brakes when they dont know what there doing.



would you attempt to rewire your house if you had to ask probably not i suspect like most people you'd say definatelty not i might get electrocuted .....well then dont mess with your brakes you might kill someone else not just yourself!!!!!!!!!
  • cute names for baby girl rats
  • hair straightening
  • Where can i go to change the brake pad?

    I live L.A. - California. Can i buy the brake pads from the internet and go to the garage to let they change for me? or i have to buy from the garage?

    Is Pep Boy good place to go?

    Do you have any service centers recommend for me?Where can i go to change the brake pad?If you really want a professional job. Leave the %26quot;what kind of brake pads%26quot; decision up to the people that do hundreds of brake jobs every month. Take your car to Allen Tire Co. They're the most honest place I know in your area for brake service. There's one in Lakewood, Torrance, Arcadia and Downey. www.allentire.comWhere can i go to change the brake pad?If you have a midas there it's probably the cheapest at $79.95 per axle.Where can i go to change the brake pad?MOST shops won't replace customer supplied parts because they can't guaranty the quality or proper fit to the vehicle.



    You're better off going to Midas, or something like them for the service.

    Lifetime warranty.Where can i go to change the brake pad?if you buy brake pads from online but want a pro to install them just take em to the local garage to do it.

    Places like Midas and such will probally throw a hissy fit since they want you to use thier pads.Where can i go to change the brake pad?buying pads and taking them to a mechanic is like walking in to a dinner with two eggs and asking the cook to fry them up for you yes pep boys is ok i'm from florida and i don't know what shops are where you liveWhere can i go to change the brake pad?If you do that you'll get double charged for the installation and no warranty, at least that's what I'd do to you.Where can i go to change the brake pad?The pads are not hard to replace at all. If you are mechanically inclined and like to work on your cars then you should be able to do it yourself. As far as you buying them and then taking them to a shop to have them put them on for you. More then likely the shop will say no because it comes down to money. But they may say yes and charge you a little bit extra.

    How do I change the front brake pads on a 2000 Kia Sportage 2WD?

    Service and Repair

    Notes



    INSPECTION





    Raise vehicle and support the frame.

    Remove the front wheel.

















    Look through side of caliper to visually check pad thickness. Also check to see if wear indicator is touching the disc assembly. Always replace pads if wear indicator touches rotor. NOTICE: Hydraulic fluid will damage paint. If fluid gets on a painted surface, wipe off immediately.

    REMOVAL



















    Remove the two caliper assembly bolts and pull caliper from disc.

















    Remove the brake pads from the adapter.

















    Remove the two adapter mounting bolts and then remove the adapter.

















    Remove the two screws and then remove the disc assembly.

    INSPECTION







    Check for oil or grease on the pads or on the disc assembly.

















    Check pad lining thickness. If below minimum, replace pad. Minimum Thickness: 0.08 inch (2.0 mm) New Thickness: 0.37 inch (9.5 mm)

    Visually check disc for damage or wear.

    Measure disc thickness. If below minimum, replace disc assembly. Standard: 0.94 inch (24 mm) Minimum: .088 inch (22.4 mm)















    Visually check the piston seal for holes, tears, or other damage. Replace using piston repair kit.

    INSTALLATION















    Place disc assembly on front axle and install the disc screws. Check the disc runout from the outer surface. Runout: 0.004 inch (0.10 mm) at 4.7 inch (12 cm) from disc center

    Check that anti-rattle clip is on the adapter and then install the adapter and bolts. Tighten the bolts to 17 ft. lbs. (23.5 Nm)

    Place brake pads on adapter.















    Using a C-clamp or similar device, push the caliper piston into the caliper.

    Place the caliper assembly in position on the disc assembly. Tighten the bolts to 72 ft. lbs. (98 Nm)



























    Install the tire and .

    Pump the brake pedal three times and then check brake movement while rotating the tire.





















    漏 2007 ALLDATA LLC. All rights reserved.

    Terms of UseHow do I change the front brake pads on a 2000 Kia Sportage 2WD?you jack it up ,make sure its safe,and remove the front wheels,and remove the caliper bolts and pull the calipers of of it,press them in real slowly with a c-clamp,and check the rotors to see if there bad ,if there alright put the new shoes in place and replace the calipers on it,and replace the bolts,tighten them good ,install the wheels ,and test drive it,and your done,good luck,i hope this help,s.

    At what minimum of thickness do you change a nissian pathfinder brake pads?

    not the maximum, but minimum thickness, then you replace it.At what minimum of thickness do you change a nissian pathfinder brake pads?They should have a piece of steel (called a squealer) on the corner of the brake pad (usually the pad on the inside) and when the brake pad wears down to that point it makes a noise. You can go to an auto parts store look at a set of new brakes and measure the distance from the squealer to the brake backing and that will tell you, or you can take off the one from your car and check.At what minimum of thickness do you change a nissian pathfinder brake pads?hmm im not sure but i guess if it starts to squeek it needs changingAt what minimum of thickness do you change a nissian pathfinder brake pads?should be an indicator on the pads that will make a high pitched or squeaking noise when change time has comeAt what minimum of thickness do you change a nissian pathfinder brake pads?change them if they squeek, look it up on ask.com

    How do i change Disc Brake Pads on a kymco atv?

    a kxr or a mongoose at the us :) plz help!How do i change Disc Brake Pads on a kymco atv?Just start doing it, and I'm sure you'll succeed.

    My car takes a long time to start after air filter and brake pad change

    I just changed out my brake pads and air filter, and now my car is acting really weird when I try and start it.



    It barely turns over for about 10 seconds (sounds like a dead battery at first), then it starts turning over (it does this for about 5 seconds) and then eventually it starts. Once it's started, everything seems to run as normal.



    It was starting just fine yesterday. COuld I have damaged something that would have caused this while changing brake pads or the air filter?



    Thanks for your help.My car takes a long time to start after air filter and brake pad changeDoes not sound likely you could have damaged something. Unless you got debris into the air intake system which you could have clogged the throttle body. Thats just a possibility.



    Maybe a coincidence but I would check out your battery at autozone or some automotive store with the special tool to check cold cranking amps.



    Maybe your plugs and wires are due for replacement, this also causes slow cranking.
  • dvd movies case
  • vb
  • Step by step procedure to change brake pads 2001 cabrio?

    it is a very fastidoius way to teach you the step by step procedures to change your brake pads why not go to the library and get the right car manual and you can follow it by yourself but i will not encourage you to do it because brake is the most important part of your car and if you dont have the right knowhow it is very dangerous to you and people around you and i forget you need the right tools to changed the brake properly so please let the mechanic check it for you and they can check your brake system completely

    goodluck!!Step by step procedure to change brake pads 2001 cabrio?step 1. take your car to a brake shop.

    step 2. pay them



    thats the easiest way but if you really want me to go through and make you a manual on how to do it let me know ( but if you take it to the right shop its only gonna cost about 70 bucks for both fronts)

    How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?

    Does the ABS need to be disconnected? Never changed brakes on a vehicle w/ ABS.How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?no u dont have to disconnect the abs just do the pads as u would anyother car .......1. take off tires 2. use a big screw driver or pry bar and colapse the caliper piston by inserting it in the opening on top of the caliper, be careful not to scratch the rotor with the screw driver or pry bar, ans do not open any lines before doing this or at any time during the job 3. take off caliper by loosening the 2 bolts on back of caliper 4. remove caliper from rotor and remove brake pads 5. clean the hardware on the caliper and lube it with either a light coat of grease or non drying silicone 5 if u use non drying silicone then apply it to the new pads( prevents the squeaking noises brakes make 6 u may have to finish colapsing the caliper piston if u do use a screw driver and place it on the edge of the piston and push it in the caliper 7. then place the caliper back on the rotor lining up the holes in back for the retaining bolts on the caliper 8. do other side when one side is done.... dont compress both caliper pistons at the saome time it will overflow the master cylinder ..... good luckHow to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?Unbolt the caliper and replace the pads. Remove the caliper mounting bracket if the rotors are to be removed and machined.How to properly change front brake pads on a 2003 silverdao 1/2 ton 2 wheel drive reg. cab v-6?p.s. Dont forget to take off the brake master cylinder cap to relieve the pressure when you compress the caliper piston with the screwdriver. Or, if you have a big c-clamp, wait till the caliper is off and compress it then. Go slowly so you dont spray brake fluid on your hood and fenderwells, cause it will eat the paint off, guaranteed!!

    Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?

    hi guys, today i went to JUST BRAKES after listening to their ad 4pad/99$..but after getting their they got my signature to change the pads and after checking the brakes they said yr rear pads are good but we need to change yr all the rotors ,calibers blah blah and at last he gave me an estimate of 950$..since almost i had my 1st heart attack i refused to do it and asked them to change only my front pads since they got signature . so guys wat should i do now whether go to my mechanic who i trust much or to do the changes when it brakes down. as far as know am not hearing any type of sounds when i apply the brakes even before or now..pl help me out..Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?There is a minimum thickness specification that determines weather or not your rotors can be reused. Find out what it is and have an honest mechanic measure them with a micrometer. If your brakes aren't squeaking, grinding, pulsating, or leaking their probably okay. $950 is to much for a simple brake job in my opinion.Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?Drive the car til you hear the brake pads startin to squeal then take the car to a reputable mechanic and have the repairs done there. Looks like you already have a reliable mechanic. Good luck !Whether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?get a book a few simple handtools and do it yourself your getting scammedWhether its time to change my brake pads,rotors,calipers for a chevy malibu 2000 with 94k miles on it?well rarely do calipers go bad. if they do its usually the way you brake wether you brake really hard alot tht can take its toll especially where the brake lines are connected to them. but unless u hav let it sit around or ur a new owner and the previous tore it up b4 you bought it tht you wont need them. rotors they hav a tendency to go bad but once again tht jus tdepends on the way you drive the car. i doubt you need rotors unless your brake pads hav an uneven wear pattern then it is prolly needed. for now stick wit the brake pads and unless you commute or go on long trips a lot more than about 20 or 30 miles dont worry bout gettin all tht done. it jus sounds lik they are trying to get your money... i drive like a nascar driver almost all the time and i drive big vehicles lik i hav a truck and a van so i kno tht braking systems can take a beating and a car lik tht wont hav any problems...

    Is It Cheaper to change my front brake pads or pay someone to do it?

    Front left wheel base on car is squealing I think it needs front brakes but was wondering how hard and how much cheaper it would be to do it myself.Is It Cheaper to change my front brake pads or pay someone to do it?It's not hard, but if you have never done it, remember that your brakes are what keep you from running into other innocent people who are not too cheap to take care of THEIR brakesIs It Cheaper to change my front brake pads or pay someone to do it?It's always cheaper to do it yourself. If you know how to do it, do it yourself, it's not that time consuming or difficult.Is It Cheaper to change my front brake pads or pay someone to do it?it's not hard and it would be a lot cheaper for you to do it your selfIs It Cheaper to change my front brake pads or pay someone to do it?It's not hard to do and much cheaper to do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?you better do it yourself if you know how. it usually costs about $100 per pad if you pay a professional.Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you're doing then it's way cheaper to do it yourself but if you don't take it somewhere to get it fixed... you might break something or not do it right then it'll cost you more to get it all fixed...Is It Cheaper to change my front brake pads or pay someone to do it?Do it yourself. It's not very hard (find a friend that knows a bit about cars and get them to help) it took me about an hour to an hour and a half and cost me a total of about $20 (i didn't have to do my rotors) it would have cost an easy $80 to pay someone to do it, so I made nearly $50 an hour doing the job myself.



    GregIs It Cheaper to change my front brake pads or pay someone to do it?Assuming you haven't let it wear to the point that the rotors need to be resurfaced or replaced, and you have some idea of what you are doing, it's always cheaper to buy the parts and do it yourself rather than pay for the labor. Do you have the needed tools?Is It Cheaper to change my front brake pads or pay someone to do it?If you know what you are doing and have the right tools than do it yourself.Is It Cheaper to change my front brake pads or pay someone to do it?If you know how to do it, it's cheaper to do it yourself. If you don't, your life, and the lives of other could hang in the balance. The extra $200 max just isn't worth that.Is It Cheaper to change my front brake pads or pay someone to do it?Probably the easiest job on a car.Is It Cheaper to change my front brake pads or pay someone to do it?From the stand point of brakes and pads it's cheaper to do it yourself if you know what you are doing. Changing brakes is a relatively easy job, but you have to look at your initial start up costs.



    1. Need a good set of Jack Stands! Never work on a vehicle that is off the ground with out them! $20



    2. Good set of tools. Don't get cheap tools, they only lend themselves to hurting yourself. You can get an inexpensive Craftsman ratchet and socket set at Sears for $50



    3. A large C-Clamp. Again I go with craftsman. $30



    4. I like having a hydraulic jack, but you can use the jack that comes with the car. $25.



    5. Brake Pads typically $20-$30 (Get the lifetime wear warranty ones from autozone and it will be the last set of pads you purchase if you don't go metal to metal. They don't honor the warranty if you go metal to metal)



    6. I would advise turning the rotors at a machine shop or auto parts store. Typically $20 ($10 per rotor is pretty standard)



    So your initial start up costs is approximately for the first brake job. $175



    Each additional time you do the brakes on that vehicle yourself will cost you only $20 (the cost to get the rotors turned).



    Can definitely save you money in the long run!



    However if you don't know what you are doing. Killing your self in an accident or hitting something/someone is never worth it.Is It Cheaper to change my front brake pads or pay someone to do it?Doing anything yourself is always a tradeoff. Yes, it's probably less expensive, tho not as much as you might expect. That's not figuring in your time. A mechanic can probably do the job in under an hour. How much time are you willing to spend? If you've never done it before, it might take you an entire day.



    Then too, there's the cost of tools if you don't have the proper ones for your car.



    And, there's the issue of liability. If you do the job and don't do it properly, there's no one to blame but yourself. Your insurance company might look at it that way too if you get in an accident.



    I've done it a few times and, for me, it's not worth the aggravation. Of course, if you like to work on cars, that's another consideration.Is It Cheaper to change my front brake pads or pay someone to do it?...and you magically have a brake lathe hiding around in your garage to turn your rotors?? go to a repair shop! if your brakes fail because you wanted to save $20, it's not just you you're endangering... it's everyone else on the road as well. good luck!Is It Cheaper to change my front brake pads or pay someone to do it?I agree with all on the opinion that it is cheaper to do your self if you have the tools and knowledge. However being a certified mechanic, I advise you to take it to a repair shop or a person who knows what to do. There is much more to a brake system than just swapping pads and having the rotors machined. If you have an ABS system, it could get damaged if you don't do it right. I have seen several minor $150 brake jobs turn into $500-$2000 jobs because of not doing it correctly.

    How do I change, my front brake pads on my 2002 jeep grand cherokee limited. which one bolt/allen screws?

    Go to your local auto parts store and purchase a Chilton's Repair Manual. In the Brake section, it gives the step by step procedure for removing disc pads or shoes for front and rear brakes. To install, reverse the procedure.
  • extension to sqltableprovider
  • xp
  • I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??

    I have a 1995 Honda Civic EX by the way. The last time the brakes were changed was shortly before I bought the car from a private party last April of 2007. I haven't noticed problems stopping but then again I don't want to wait until they get to be paper thin to replace them either. I'd like to keep myself and anyone in my car safer with brake pads changed on a regular schedule just like changing my oil and filter. Thanks!I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??the fronts really do most of work i'd change every 10,000 miles do the back at same time hard to do... maybe 1/2 hour each wheel. do fronts first! get a friend to helpp.. it's good for convesation at least!I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Hi, brakes change will depend on your braking habit. Hard braking means you will wear them out more. Gentle and gradual braking will conserve your brake pads. You can drive 100,000miles and hit your brakes once and they will be as good as new.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??City driving with lots of stop and go will wear brakes more than open highway driving, so the type of driving will play a part in the wear of your brakes.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??For disc brakes, you can see the brake linings on the brake pads and I will consider changing them in pairs on the wheels when the linings wore down to about 1/16th of an inch. You can still have effective braking with them still.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Your vehicle drive train will also wear brakes more. If you have a front-wheel drive car, the front brakes will tend to wear faster due to having stop heavier momentum, likewise the rear brakes for rear-wheel drive. Take a look at the brake pads for best gauge to replacing them.

    Report Abuse

    I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??If there is no damage other than normal wear, they should last at leat 10 thousand miles. and possibly even more i have 15 000 on mine. and i want to replace thms soon. they are allright they are just worn down too low to suit me. This has been 5 years for me. That would be about 3000 miles a year for me.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Most if not all cars with disc brakes have a little metal plate which rubs against the disc when you are getting to the stage where they need to be replaced, the wear indicator will make a screeching sound when it's time to replace the pads, my last set of pads lasted me 100,000 km's.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Disc brake pads have a sensor built in on them. It all depends on how much you drive your car. If your discs are smooth, your pads will last for a very long time. Listen for a scraping sound that will usually go away when you hit the brakes.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??Have your tires rotated on a regular basis by someone that knows what they are doing.Each time they (or you), can visually inspect the pads and know how much pad you have leftI have disc brakes in the front and back. How often (miles or time) should I change the brake pads??A good breakpad should last up to 100,000 miles.I have disc brakes in the front and back. How often (miles or time) should I change the brake pads??On all autos, with disk brakes, the brake pad has a flexible metal tab, that creates a %26quot;skreching/rubbing%26quot; noise when the thickness of the pad becomes unsafe. In most cars, the front wheels/brakes will wear faster than the rear pads. The amount that the car is used, whether in the city with a lot of stop and go traffic, or in the country, with long open driving condition, will determine the frequency of need to %26quot;re-do your brakes%26quot;. Of importance, if you do hear the sound of scrapping/rubbing noise, if allowed to go too long, will cause your brake rotors to wear abnormally. Making additional cost of brake repair. Usually when detected early, changing the pads frequently will prolong the life of your rotor, and even the calipers holding the pad will last longer. Your oil, and engine maintenance will be required a lot more often than the need to replace your brake pads. Most auto service centers, will provide a courtesy walk around inspection of your car when you take it in for your routine oil change service. A sign of wear of your brakes, is sometime seen as a black dust/powder showing through your wheels.

    Changing brake pads pulling off caliper?

    when ever i try to change brake pads its either hit or miss....

    sometimes when i pull off caliper the pistons and worn pads are pushed to the rotor making it impossible to slide in the new pads....

    please note that i dont want to use a method that would break any seal around piston



    how do i push em back or prepare my car for the maintenance?Changing brake pads pulling off caliper?Use a C-clamp and press on the old brake pad ( pushes the piston back )

    you first MUST remove the 2 caliper bolts and pull the caliper off the rotor. You do not have to remove the brake line though... Just try to balance the caliper on top of the rotor while working with it to push the piston back.. No brake bleeding required this wayChanging brake pads pulling off caliper?In an automotive garage they usually have a tool for pushing the caliper pistons back into the caliper. It looks like a backwards pliers that pushes out with two plates on each side. This essentially pushes both sides of the caliper back in easily. You could try to find one of these or you can use channel locks to push the calipers back in a little at a time. Vise Grips will also work great if you have these tools. If not you can always try to use anything like a screwdriver or something like that to simply push the calipers back in.Changing brake pads pulling off caliper?I usually pry open the caliper a little with a big screw driver to release some of the pressure and then the caliper and pads come right off. Open the break fluid container in the engine compartment and get ready to soak up the overflow.

    It is very hard to take them off if you do not release some of the pressure.Changing brake pads pulling off caliper?I use a 6 inch c-clamp. Leave one of the old pads in the Caliber against the piston and Tighten slowly, and do not be alarmed with fluid that might over flow from the master cylinder.Changing brake pads pulling off caliper?you use a c-clamp to push the piston back into its bore so the new pads will go over the rotor.you won,t break the seal. the seal is up inside the piston. what you see on the outside is the dust boot.

    How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?

    I need to know how to get the calipers off of a 1999 Mercury marquis so I can change the brake pads and have the rotorys turned.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?Assuming you are referring to the front brakes, remove the two 13mm caliper bolts that secure the caliper to the caliper bracket. Using a screwdriver, gently pry the caliper off the pads. Using a 1/2%26quot; drive socket with a johnson bar, remove the two 18mm bolts that secure the brake pad and caliper support bracket to the steering knuckle. Remove the brake rotor. Repeat steps for other side. Installation is the reverse of removal. Hope this helps.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?after removing the wheel you will see two 11/16 bolts right on the front side of the caliper remove them and the caliper will come off.How to change break pads on a 1999 Mercury Marquis. How do I get the caliper off?Remove tire and you will see big bolts on inside remove bolts , Rotor should come right off, To go back on remove master cylinder cap or loosen with a C-clamp depress piston all the way back it has to all the way back replace rotor replace caliper tighten bolts , hope this helps.

    How to change brake pads on chevy cavalier?

    1989 chevy cavalierHow to change brake pads on chevy cavalier?Get a repair manual for $20. It will give you step by step instructions. You will need a TORX socket to remove the caliper bolts, a C-Clamp to push the piston back in the caliper. Unless you are going to have the rotors resurfaced, I'd replace those at the same time, they are pretty cheap for those model cars.How to change brake pads on chevy cavalier?go to auto zone and buy a haynes manual for the car it will go step by stepHow to change brake pads on chevy cavalier?a haynes manuel will show you step by step how to do it. first after you have the wheel off and the car is secure take a c-clamp and push the piston back into its bore, if you have torx bolts in the caliper then you need a torx bit ( maybe a T-50), take the bolts out, change the pads, put the caliper back on and tighten the bolts, spray it down with some brake cleaner and go to the other side.

    Is there any online information on how to change break pads?

    online information or diagrams on how to change brake pads and turn rotars on a 1995 pontiac sunfire also any information on how to change the spark plugs and spark plug wires on a pontiac sunfire 1995 ? the engine is quite awkward the plugs and wires seem to be hard to locate and reachIs there any online information on how to change break pads?Go to www.advanceautoparts.comand look under %26quot;know how articles%26quot;.Is there any online information on how to change break pads?Spend the $20 %26amp; buy a Haynes or Chilton manual for you vehicle. It's money well spent %26amp; you will have it for future reference.

    _ _ _Is there any online information on how to change break pads?I can change your brake pads. ^_^ I've done the procedure hundreds of times.Is there any online information on how to change break pads?http://www.autozone.com/addVehicleId,199





    good luck...Is there any online information on how to change break pads?Oh man it is easy to do. Once you do one it becomes clear how to do others atleast for disk brakes. I pressume that is what you have wince you spoke of turning rotors.



    Go online do a search for changing brake pads or join a forum for your vehicle.Is there any online information on how to change break pads?First things first.



    The article I'm giving you is a general how-to on how to do your brake pads. Turning your rotors is something you can't do at home. You need to take the rotors (which should come off in the process of changing the brake pads) to a shop and ask them IF they can be turned (if they have been turned before or if they are warped, you may not be able to turn them).



    As for the plugs and wires, just follow your plug wires to the end, and voila! There are the plugs. Do those one at a time, and make sure you gap your plugs to the recommended gap. If you don't know the proper gap, you can ask your local parts guy for the proper gap, or look at the manufacturers label under the hood. Somewhere on there is a proper gap setting.



    That being said, it is easier to go down to your parts place and get a Chilton's or Haynes manual. It will have the proper procedure to do both jobs, along with other handy tips to keep your car going.Is there any online information on how to change break pads?Whats to know? To change the brake pads, remove the wheel, un-bolt the caliper (just 2 bolts), lift it off, push in the caliper piston, remove old pads, insert new pads (after lubing them appropriately) and re-install. Same as just about any pad slap on any car. Litterally after removing the wheel there are only 2 bolts to deal with.



    The spark plugs and wires are also no big wup either. Just remove the top cover off the engine and everything is right there. If its a 2.4 DOHC (Quad 4) engine it will not have spark plug wires but rather hard boots that are built right into the cover. These are a frequent source of problems and should be replaced at the same time as the plugs.



    If its a 2.2 engine you might as well replace that leaking valve cover gasket as long as you are in there. That's easy too, something like 11 or 12 bolts and she comes right out.
  • web hosting domains
  • connect hdd to pc
  • Do you need to cut the rotors everytime you change your brake pads?

    I was told that you need to cut the rotors everytime you change the brake pads even if they are not wore..I just had my brakes look at .They told me no matter I have to cut them .I have 28,000 miles I need to change the pads soon on the back and 1/2 left on the front.2009Do you need to cut the rotors everytime you change your brake pads?Rotors should only be cut once. 28,000 miles seems to be too soon for pads to wear out.Do you need to cut the rotors everytime you change your brake pads?28,000 miles is WAY too soon for rear brakes... rear brakes only do 5-10% of braking, when you step on the brakes, the weight shifts to the front, so your front pads do most of the work.... rear brakes can last to 100k miles. But to answer your question, yes the rotors need to be cut everytime you change pads, if you didnt, the pads would be smooth, while the rotors are unven, causing elss surface area for the pads and rotors to meet

    Which place is good to change the brake pads?

    The place that has a nice service and I can trustWhich place is good to change the brake pads?I've been to Meineke Muffler/Brakes in a couple of different states, and been very pleased with their work. What I do is look up a shop on Yahoo and see if there is a customer rating for them, and based upon what customers have said, I'll decide. Here in my current town, Meineke passed that test and did a fantastic job.Which place is good to change the brake pads?take it to auto zone,they will hook up the scan tool and check for codes,tell them that my ex husband sent you and they may even fix it for free,or you can buy a haynes manual for $20 and it will show you everything,don't forget to change your air and fuel filters too,good luck,hope this helpsWhich place is good to change the brake pads?Changing brake pads is done well at most places that sell tires. Machine the rotors too.

    How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?

    My passenger side rear drum brake has recently started grinding which I assume is it telling me the pads are worn. I am considering attempting to change the pads myself and wanted to know the complexity of the task, before I continue or pay a mechanic (over the odds) for the work.



    I am fairly confident at most smaller DIY jobs.



    ThanksHow easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?Absolutely simple %26amp; straightforward job. Get yourself a Haynes manual - well worth it.

    And drums have shoes; discs have pads.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?you can get it dont easliy the only hard part will probably be the rust and the rear caliper piston on which you will have to turn counter clockwise and push in at the same time to get the piston to return to allow the calpiter back on to the rotorHow easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?perfectly diy....

    but you mention pads and drums,meaning disc and shoes...it may have both depending on the design...best bet is some exploratory examination first[split and look] and go from there....shoe self adjusters can be a pain but that's about it...basic tools only.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?as a mechanic myself id advise you to get a mechanic to do it. brakes being an important thing in helping to slown down the car and not kill any one.How easy is it to change the pads on a rear drum brake in a 1995 BMW E36 Compact?get a haynes or chiltons book at autozone for 13 bucks, drum brakes are not as easy as disk especially adjusting them, the book will show you step by step with pictures, and a lot cheaper than a mechanic.

    Three lights on after brake pad change ?

    We changed our brake pads in the front and brake seems to work fine but three lights came on engine light, traction control, and VSC. Im eventually going to take it to the shop but need to drive them tommorow for at least 6 hours staright. Should I be concerned ? Car is RX300 btw.Three lights on after brake pad change ?If it drives okay you don't need to be concerned, but you won't have anti-lock (only normal braking) and the stability control won't work. You have some sort of sensor problem on one of the front wheels - there is an ABS sensor on each.



    Because the engine light is on, you won't know if any other engine/emission related problems pop up. That is no big risk, but just don't play the game too long. A week is no big deal, a year is a bigger deal.Three lights on after brake pad change ?It sounds like they unplugged the wheel speed sensor and forgot to plug it back in, or damaged it during the job. If that's the case, your car is still perfectly safe to drive, just get it checked out soon.Three lights on after brake pad change ?A few friends of mine had the same problem but I'm not sure if it would work for you as well, check to see if the hose behind my air filter was disconnected. (After checking it disconnect the battery for 10mins and reconnect) Most said the Lights go away after that... Worth a shot?Three lights on after brake pad change ?Worst case scenario is that you don't have ABS. Big whoop. ABS isn't really needed if you drive safely anyways.





    Still safe to drive, don't worry about it.

    When do you first have to change the brake pads on a 2007 Lexus ES350. Was it the front or rear brakes?

    Brakes pads are not changed at a particular mileage, but by how much they have worn. If you drive rough and mostly stop-n-go local, you'd be lucky to last 20K, but if you drive mostly highway with no braking, you could go 90k without changing them. If and until you feel or hear any noise in your brakes, you won't need to worry about them. The mechanic will visually inspect them when you bring in your car for say oil change or other maintenance where they raise your car.



    As for front or back, normally the fronts go first as they are taking the load of the braking, which is why most vehicles the front pads are bigger than the rears.When do you first have to change the brake pads on a 2007 Lexus ES350. Was it the front or rear brakes?there is no set time to do this ..... because it is based on your driving style. I know a teen girl that goes through front brakes every 10 weeks ... it is very scary to drive with her .... you never know if you will get to your destination alive ... or not ... !



    On the other hand ... it took me 7 years to wear mine out. I am serious ... so just do a visual inspection .... it should be free with an oil change ...



    Please remember to always keep up with all your fluid changes ... I do engine oil every 3,000 regardless ..... and I always make sure the oil level is correct no matter what.



    Please make sure to do your Transmission service at about 30,000 miles ..... very important ...... even if they tell you it is ok to do it at 50,000 ..... ughhhhh ... nooooooooooo ..... 30,000 miles is a very safe point to do it .... you could go longer, yes ... but again, it is based on how you drive ......



    hope this helps ....
  • remove win32 trojan
  • data into xsds
  • How do i change the brake pads on my 93 ford mustang?

    i got the caliper locating pins off and the caliper assembaly is loose but it wont come off what am i doing wrong? its the lx modelHow do i change the brake pads on my 93 ford mustang?Well first things first...you need to pry the piston back into the caliper..do this with a big screwdriver or prybar..but it in the hole on top of the caliper,and pry towards u off the rotor.get it so there is about a 1/4-1/2 inch gap and then it should just lift off.once the pads are out of the caliper u need to push the piston back in all the way to make room for the new pads..i use either a huge pair of channel locks or a c-clamp.How do i change the brake pads on my 93 ford mustang?if all the pins are out the take a big screwdriver and pry between the rotor and caliper.

    What tools are needed to change brake pads?

    You'll need a jack and a lug wrench obviously. The calipers usually take a T50 torx head or a 3/8%26quot; hex head to remove. A large C-clamp for pressing the pistons back into the calipers, but some vehicles take a special spanner socket to compress the pistons. Looks like this ----------------------------------------?http://contentinfo.autozone.com/znetcs/pWhat tools are needed to change brake pads?depends on the vehicle...a lot of vehicles are different

    How much dose it cost to change the back brake pads.?

    With the cost of labor included.How much dose it cost to change the back brake pads.?If all you need is pad replacement, I would expect to pay no more than $50 (US) per axle. More work means more money. I am also assuming you are not driving an exotic.How much dose it cost to change the back brake pads.?I would take 10 doses of vikes including labor.How much dose it cost to change the back brake pads.?We just had this done on our hyundai elantra at Budget Brakes. cost 138 bucks total.How much dose it cost to change the back brake pads.?I have seen some go as much as $169 or as little as $49.95, it is depend on where you go. You could also do it yourself for the cost of the pad ($19.97) at your local auto zone.

    How To Change Brake Pads?

    You're kidding right? Do you expect someone to tell you how to change brake pads on every car ever made? If you want a better answer than the first 2, post your Year, Make and Model of car here, and then send me a message, and chances are I can link you to a website that explains every little detail, including pictures. Oh, also front or rear brakes might help too.How To Change Brake Pads?use a tampon insteadHow To Change Brake Pads?If you have to ask and not give details of what kind of vehicle, then you need to take it to a shop and let apro do it so it will be right, and you will not kill any one with your handy work,



    Take it to a shop.How To Change Brake Pads?Your vehicles Manual will not tell you how to replace you pads. This is relatively simple and can be done fairly in expensive. Sounds like you are a new shady tree mech. Good. !st go to Advance Auto or Auto Zone and pick up a Haines manual for your vehicle. It will step you thru the pad replacement as well as many other repairs. I could step you thru but I don't have any pictures. The Haines Manual will.How To Change Brake Pads? jack up ur car, truck ect...loosen lug nuts to wheel pull wheel off u should see the caliper on rotor depending on the vehicle u will need either align wrench to loosen the caliperor socket or a star pull caliper off and remove one pad at a timewhen u have pads off take c clamp and old pad to push the cyclinder back in then put new pads on ,then caliper back on tighten caliper put tire back on tighten lug nutsin criss cross motion and jack car down .repeat for other side. but remember always put rock or something of the sort behind rear tire before jacking up the car .How To Change Brake Pads?If you need to ask you are not capable of doing it. Take it to a mechanic.

    How do you change disc brake pads on a 1994 lincoln towncar?

    Grab a manual for this. It'll be easier and the directions will be much more specific to your car. Haynes and Chiltons both make good ones with plenty of pictures.



    First, jack up the car and rest it on jack stands. DO NOT DO THIS WITHOUT JACK STANDS. People will say it's fine, and a jack will hold, which many will, however, I had a seal in one give out on me once. An extra couple of minutes for jack stands will save you from the scare of your life.



    Pop off the wheels. Yuo'll be looking at the rotor and the caliper now.



    You'll need....



    Brake Cleaner (aerosol spray)

    Something to catch the overspray, like an oil pan

    Wrenches and a socket set

    Maybe a set of allen wrenches

    Some brake grease

    New Pads

    Emory Cloth (sandpaper)

    A bungee cord or a metal coat hanger

    A C-Clamp



    Pop off the caliper by unbolting wjhat is normally two bolts holding it. Take the old pads out.



    Using the bungee cord, hang the caliper somewhere that will give the rubber brake lines some slack.



    Take your emory cloth, and sand circles into the rotor. Not to make marks, more just to remove old brake dust and glazing. Spray down with the brake cleaner thoroughly.



    Take the new pads, and follow the instructions on the inside. You will be greasing where it tells you to...the BACK of the pads where there will be a metal to metal connection. DO NOT GET THIS GREASE ON THE ROTOR.



    Place grease on the contact points on the calipers as well. Use Brake Grease, or high temperature grease.



    There should be a giant piston on the brake line side of the caliper. With the c-clamp, depress this. You may get some fluid spilling out of your brake resevoir, but it's ok. As long as none of the lines are disconnected, you won;t have to bleed the system.



    Place the pads in the caliper, put it back on the rotor, tighten and torque the bolts to specification.



    Open beer.
  • drawing a circle
  • dog
  • Has anyone changed the brake pads on a 98 gmc jimmy?

    My husband is trying to change the brake pads on a 98 gmc jimmy. But he cannot get the old ones off. Does anyone know how to or know any websites that can help?Has anyone changed the brake pads on a 98 gmc jimmy?http://www.autozone.com/shopping/repairG This site will help with the brake pad removal and some really good info and pics.Best of luck.Has anyone changed the brake pads on a 98 gmc jimmy?Take a screw driver and wedge it between the rotor and brake pad and compress the piston in as he can so he can get the new brakes in as well.

    How do you change the brake pads on a 2005 F150?

    Goto a auto Repair.How do you change the brake pads on a 2005 F150?If you have to ask that question on here you shouldn't be working on your brakes.

    Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?

    The dealership told us we needed new break pads and rotors. The car only has 30k miles on it. The wheels do not squeak or pull when we brake. We called a shop the specializes in cars like Volvos. He said usually have to change both pieces when changing the brake pads on newer cars like ours.



    A friend of mine who works on cars told me 30k to change the pads seems soon and definitely soon for rotors. He told me their is a reason why dealerships are know as stealerships.



    Can anyone chime in on this? Is this normal? What might the cost be if it is necessary to replace everything? We are not crazy drivers who ride the brakes or anything. Any comments are appreciated.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?I'll start by saying I am a volvo dealership tech. Volvo brakes wear quickly but work very well, It is a compramise, you either get long life out of your brakes with inferior stopping power or you can have softer faster wearing brake pads and rotors and have far superior braking power. It is by no means abnormal for your vehicle to need brake pads and rotors at 30k, If you have any doubt you simply ask the service advisor what the rotors currently measure and ask what is the specification that the rotor needs replaced, All rotors wear out over time and there is always a min. thickness specification at pad replacement, I do beleive your vehicles rotors need to be repaced when they measure around 23.8 mm.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?its easy for the dealer just to replace the pads and rotors at one time .#1-more money on the ticket#2easy for the mechanic to replace the rotors instead of getting his union asss dirty machining the rotors.go to a repair shop that's locally owned,they rely on your buis,dealers don't care if you never come back.thats why they charge so much the first time ,its probably the last time also.unless you ground the pads down metal to metal,the rotors can be machined.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?well you can useually get your rotors turned for cheap so you dont have to buy new ones. and the break pads usually if you take the tire off you can look at them and see if they need to be changed or not. you will know if they need to be changed or not by just looking at them.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?well thats ford for ya,,,cheap factory production parts to keep the consumer coming back to the auto parts industry going,,,WELCOME TO AMERICA's CORPORATE SCHEME,,, %26quot;GOT MONEY%26quot;Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?I doesn't sound common to me , I am not a mechanic or anything but if I was in that situation I would take into getting it checked out at a garage into consideration .Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?If you ran your pads down to the nubs and they went metal to metal against the rotor, then yes, you're looking at replacing the rotors.



    If you DIDN'T, then don't let the bum sell you rotors. Unless they're heat-warped, there's no need to even resurface them after only 30k miles.



    When I was a poor kid I'd NEVER replace drums even though they really should have been. They always worked well and never complained.



    I had a Honda once that gobbled up brake pads every 15,000, so getting 30,000 from Volvo pads sounds about right.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?You may not ride the brakes but if someone else drives the car they could. But Because of all the lawsuits car companies have gone threw they have to change them both back to factory spec, you don't like the price tell the people to quit suing over 2 pounds of air pressure like happened to ford. Any dealer will be more expensive than a independent shop, they can turn the rotors if they are tunable and often can turn them on the car without removing them and replace the pads for 30% less than the dealer but is the warranty the same? and will they last as long? once you turn the rotors if they can be the next time you will have to toss them, also do they repack the front bearing on front wheel cars? And it is possible you have sticking rotors or calipers and that could be from running with a boot that's cracked and allowing water to enter the chamber which could cause the caliper to stick, but have your Freind pull of a tire for you and have him look at the pads and rotors he can tell you but if he's a mechanic offer him a few bucks that's his living. Would you be upset if someone asked you to work for free?Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?have the pad life measured. anything thicker than 6 milimeter is usually within spec. front pads might be bad on this car, yes, even with only 30,000. is there any brake pedal vibration when braking from highway speed? this is fixed by resurfacing the front rotors. being as new as it is, you can probably get away with resurfacing them rather than replacing them. if the rotors are metal to metal, with deep grooves that can't be machined out, then yes, they will have to be replaces.



    dealerships aren't necessarily out to rip you off. but please keep your eye out on rip-offs. get secondary opinions or even 3 estimates from different shops and find out what they all have in common. i work at a dealership for general motors and wouldn't even think about ripping someone off. too many situations where you can get in trouble doing that sort of thing. i like to play it straight by the book.Is it normal to need to change both brake pads and rotors on a 2005 Volvo S40 with 30k miles?Depending on driving conditions your car faces everyday.If u live in San Francisco and your daily commute is going up and down the hills,more braking power is needed to slow down the car thus speeding up the wearing on the pads.Also stop n go traffic has the same affect.I can see replacing the front brakes at 30k miles is normal.Rear brakes only do approx. roughly 20-25% of the braking therefore you'll be replacing rear brakes possibly when the front brakes goes through it's second or third time around.I also recommend replacing disc rotors every time brake pads are replace.Reason why:Rotors get thinner and doesn't dissipate heat and is more susceptible to warp page and brake noise.

    Does anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?

    DIY about 70 tops

    Citroen dealer - 200 ish

    Independent garage 120

    Kwik fit or similar - 140



    Above are estimates for front only



    Why not just ring them - would take you all of 10 minutes?Does anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?It all depends on where do you get it changed from. If you want to do it on your own, I will suggest you to buy pads from a standard spare parts shop which should cost you about 40 and that's it. If you want to get it done from a local mechanic, he can charge you upto 20 on top of it. If you are getting it done from an Autocentre then they will charge you around 100(including everything).

    I will suggest not to use places like Kwik Fit, Nationwide Autocentres or any other express repair shops. they just charge you loads for nothing.

    So best is to get it done from a nice autocentre which charge you a little bit extra from a local mechanic and lot less than Kwik Fit type of centres and gives you 1000% peace of mind.

    Shop around and see who gives you best service and guarantees the service.

    All the bestDoes anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?do it your self about 35 bucks for pads and to turn down rotors about ten bucks each at any shop easy do at home job my wife does her own brake jobs



    type into search box



    how to replace brake pads video

    how to remove brake rotors video

    how to bleed brake video



    you can call any shop local and get a price just by asking how much is a brake job for ive never payed anyone to do it for me its that easy you can go to autozone.com look at top of page do it yourself type in your car info look up price and get a how to as well but most shops wil be 100 bucks and up depending on how bad or how long you drove it with bad brake pads can be into the 500 buck range might be 100 bucks just depends on who you call to do the job or if you do it at homeDoes anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?the price will depend on were you by and the type of brakes you by if you install them your self you can find a book on how to do this you can find this on line good luck lk2bikehdDoes anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?I have bought brake disks and pads for that exact car online at www.brakeparts.co.uk and it cost me 70.86......



    Not sure how much it would cost if you want a mechanic to it.Does anyone know how much it will cost to change the brake pads and disks on my Citroen C2 1.1 04 car?i don't have the slightest idea

    How do you change the rear brake pads on a 1998 Lincoln Town Car?

    Rear disk? if it is you will need to collapse the caliper. You will need to go to the parts store, buy a collapsing tool, not really sure what they call it, but just explain what you need to do. Now that you have the tool, you are ready to go, you will use the tool to turn in the piston in the caliper. now you can put new pads in (you did turn the rotors, right?) put the wheels on and drive, Note do pump up the brakes before you put it in gear! Good luck Dave



    Note, Tbone is trying hard but you can not - use a C-Clamp to compress the piston! you will just cuss a lot and throw things. need the tool.How do you change the rear brake pads on a 1998 Lincoln Town Car?u can ask a mechanic about thatHow do you change the rear brake pads on a 1998 Lincoln Town Car?Take it to the shop and ask them to do it for you.How do you change the rear brake pads on a 1998 Lincoln Town Car?www.autozone.com



    go to their repair info section, it'll give you the step by stepHow do you change the rear brake pads on a 1998 Lincoln Town Car?thats simple, take the wheels off, you need a 10mm wrench. Undo the 2 bolts holding the caliper, remove the caliper, take the old pads out. Compress the caliper with a C clamp. Put the new pads in. Put the caliper back on. REally nothing to it. Make sure you get the bolts tight so the caliper doesn't come off though.How do you change the rear brake pads on a 1998 Lincoln Town Car?trust me........ you are in over your head........... take it to a reputable mechanicHow do you change the rear brake pads on a 1998 Lincoln Town Car?http://www.automedia.com/Replacing/Brake

    scroll down for step by step how to with picsHow do you change the rear brake pads on a 1998 Lincoln Town Car?John this caliper will not compress it twist in with a special tool or chanle locks
  • migrating existing portal
  • do for extremely dry skin
  • New brakes, getting new rotor, should i still change pads?

    Just got my brake pads changed, but the rotors are getting old, so i will be changing them later on the during the week, should i change the pads again, or just use the ones i have since i just got them?New brakes, getting new rotor, should i still change pads?as long as the new pads dont have any grooves in them you should be okay.New brakes, getting new rotor, should i still change pads?Pads should be fine.New brakes, getting new rotor, should i still change pads?it is recommend to change the pads.



    you should also at least get your rotors and drums lathed when you change pads.New brakes, getting new rotor, should i still change pads?Use the ones you have if they are still flat and not heat cracked or worn unevenly.New brakes, getting new rotor, should i still change pads?use new pads with new rotors....the old pads have worn down a bit to match the old rotorsNew brakes, getting new rotor, should i still change pads?no. basically since its only a week old, it's new. just change the rotors.New brakes, getting new rotor, should i still change pads?re-use what you have (even though i like everything new at the same time)New brakes, getting new rotor, should i still change pads?yes,why spend all that money and not get new pads?besides,the old ones have dirt and other stuff that can screw up all that brand new shiny stuff.after a week the other pads have already broken in to the old stuff and will cause problems wearing the new stuff out.New brakes, getting new rotor, should i still change pads?If you are not sure about brakes. Dont mess around with them. remember this is what stops you. Take it to a reputable mechanic and get the job done right. It could be your life you safe. instead of a few bucks.

    Cost to change the brake pads??

    do u know appx cost to change the brake pads. my car is acura integra. tksCost to change the brake pads??99.88 in most casesCost to change the brake pads??Are you taking it in if so it will cost anywhere from 50-150 dollars if you know someone who can do it, it is generally cheaper I usually just have the person buy the supplies they need but that is just meCost to change the brake pads??about $50 for pads if you do it yourselfCost to change the brake pads??Just pads around $75.00 to $100. bucks depending on where you live.Cost to change the brake pads??brake pads $20-$30. if you need rotors $15-$25. labor ? up to the person doing themCost to change the brake pads??75,00 too ioo,oo your best bet drag it to walmarts automative repair, if your god when you make the appointment if your hot and reasdy to strip, hop in back seat hey who know might be on the house doll---saint antinio wallmart repair manager here dont r eoprt me to wallmart headquarters therre doll, we will discuss price after you hop in back seat and do the big bang with me doll!Cost to change the brake pads??Any price you get will depend on the condition of your brakes in the front %26amp; rear. If you have a lower mileage vehicle you may just need a basic brake job. If you have a lot of miles you may need more extensive repairs. A lot of repair facilities will inspect %26amp; give you an estimate for little or no charge. Shop around !!Cost to change the brake pads??Depends on who does it. If it is you and they are not hard to do then it about 20 for front and 20 for the rear at Auto Zone. And that is if the rotors are not worn. Grinding a rotor can cost 20 a wheel. Always change before you get t the rotor. Go to a brake place and it will cost 165 to 185. Reason is that they have to warrantee every job so they go completely through the system. A chance of wear and they replace it.



    JoelTCost to change the brake pads??Not enough info----- What year is the car?

    Which pads need replaced ----front or rear?

    Are you asking for a price on the pads, the labor for changing them, or both?

    Where are you located? Believe it or not, there can be a substantial cost difference in repair prices from, say, Wheeling, W.Va. to Malibu , Calif.

    Do you know if there's any wear or damage to the rotors, calipers and stuff like that? If you can answer these things for me I'll do my best to get an accurate answer for you. Good luck!!!

    How to change front brake pads in Honda Accord 2005?

    Honda Accord LX 2005. 4 cyl.How to change front brake pads in Honda Accord 2005?check out my 360 page my blog covers it very wellHow to change front brake pads in Honda Accord 2005?1 First jack up the wheel that you need to work on. Turn the lug nuts 1 full turn while wheel on ground, jack the car up and take out all lug nuts.



    2 The wheel is out of the way, you should be able to see the brake caliper. Undo the bottom nuts, and entire caliper can be slide up and pads will fall out.



    3 Before installing new brake pads, the old brake piston must be pushed back. I use 7%26quot; C clamp.



    4 Put the new pads in, place and tighten the caliper bolds %26amp; mount the wheel, and tighten the lug nuts.



    pretty easy, but takes practice. I can usually do 30 minutes per wheel.



    In step 3, some mechanics don't like to press all that brake fluid in reverse direction (they believe that it can harm ABS controller or brake master cylinder) so they might open up the caliper bleed valve and let the fluid come out instead of pushing it all the way up to the master cylinder. You would need to be careful not to introduce air in the system or you would need to bleed the system.How to change front brake pads in Honda Accord 2005?Here are general photos of front disc pad replacement steps:



    http://www.troublecodes.net/articles/frn

    How to change rear brake pads on 2006 Hyundai Elantra?

    I changed my brake pads in the front without any problems, I found the caliper and everything... but, when I moved to change the ones in the back I cannot see the caliper



    I found where the line for the brake fluid is leading to the wheel but from there I'm lost... can anyone tell me how to change the pads in the back? or know a link to a good site?How to change rear brake pads on 2006 Hyundai Elantra?its called drums.. you have to take the face of the drum off and replace the shoes.. there are no calipers or rotors

    How do you change the front brake pads on a 2000 ford ranger?

    if you have to ask then its better left to a mechanic......

    not a dealer or large garage,look for a cheep back street garage...40ish to do.
  • how do i get my girlfriend to
  • improve my well being
  • When to change brake pads for honda civic 2000?

    After 30,000 miles remove a front wheel and put a jack stand under the lift point next to the jack for safety. Then, with a flashlight in hand, look at the upper and lower thickness of both the inside and outside brake pads. When any point on the friction lining has worn down to about 1/8 of an inch, replace the pads.When to change brake pads for honda civic 2000?bob web has the right answer

    How to change brake pads on a Saab 900 s?

    I have a 900se turbo... the brakes are not that hard... pretty much like any other car but be sure to have the rotors miked because they will shake your tonsils out if they become warped.

    How do i change the front brake pads on a p reg polo 1L?

    they are the bendix, vented type.

    i cant see what to unbolt to lift off the caliper to remove the padsHow do i change the front brake pads on a p reg polo 1L?RTFM



    Are there some Allen head bolts on the inner side of them?How do i change the front brake pads on a p reg polo 1L?most claipers have the two bolts, rip it off install the new pads and you have to open the gap by pushing on the pads to push the pistons back.How do i change the front brake pads on a p reg polo 1L?As per firat answer, if you look on the inside (engine side) of the caliper, you'll see two rubber plugs, one at either end of where the brake pad is.

    Prise them out %26amp; you can then undo the long bolt underneath with a 7mm Allen key - You may be able to undo the front one %26amp; then 'swing' the pad carrier up to replace the pads - if not, just undo the second allen bolt.How do i change the front brake pads on a p reg polo 1L?Buy the Haynes manual for 20. You will be able to do the brake job properly and it will save you a fortune in future.

    Place to change the brake pads?

    I live in L.A. and would like to know which place is good to change the brake pads, Between AAMCO.,Meineke, Midas, and Allen Tire Co.Place to change the brake pads?I have never been a fan of muffler shops performing brake jobs. Take a look at the Car Talk mechanics files to see if there is a recommended mechanic in your area. The Mechanics Files is a database of over 16,000 great mechanics, recommended by and for the Car Talk community.Place to change the brake pads?I'd see if there is a %26quot;TUFFY%26quot; shop by you.Place to change the brake pads?There are so many employees at these chain stores, you can never count on getting the same employee the 2nd and 3rd visit. So pick a place near your home or place of work, then decide if you must have your favorite brand of brake pad. Some of the chain stores have their own brand of parts. Are you willing to try and use an unknown item? Most are good, but brake pads have hundreds of types and manufacturers.

    90 lexus ls 400 how to change front brake pads?

    I just need to know how to push back the caliper. I know not spelled right sorry. Please just step by step help would be great90 lexus ls 400 how to change front brake pads?You can usually do this by taking the lid off of the reservoir and then putting a C clamp across one of the old pads and back of the caliper. (while the pad is in place)



    Crank down on the C clamp slowly (so that no fluid shoots out of the reservoir) until there is enough space to fit the new pads and have them fit over the rotor.



    This method doesn't open the system, so air can't get in.

    (No need to bleed the system afterwards)



    :)90 lexus ls 400 how to change front brake pads?Always open the bleeder, then compress with a clamp or large pliers. After installing your brakes, take the top off the master cylinder, fill it up, and crack the bleeders one at a time for a few seconds to let it gravity bleed. If you dont open the bleeders to compress the caliper, you take a chance of forcing old/dirty brake fluid back into the master cylinder possibly damaging it internally.90 lexus ls 400 how to change front brake pads?Open the bleeder valve and push the pistons back. But you should remove the calipers, blow the pistons out with low (20psi) air pressure, clean out the calipers and carefully put them back together. Again you will need low air pressure. If you have never done this try and find a friend or someone that has to help you. Any dirt or crud in the calipers can cause the brakes to lock up.
  • pink hair
  • new hair styles
  • In brake replacement, The mechanic told me that both the rotors and pad need to change?

    Is for w124 mercedes. Well my brakes work fine, I just want to change the pads. But why he says the rotors need to change too? I don't see a need in it. I want to change the frontal brake pads because I heard a screech noise- so is better to change soon.In brake replacement, The mechanic told me that both the rotors and pad need to change?If you don't think you need it, you might not. Go around to different auto shops and see what they say about them. If they say the same, then you probably should get them changed.



    Good luckIn brake replacement, The mechanic told me that both the rotors and pad need to change?take the front wheel off on the side where you hear most squeaking from and look at rotor and if it is rough then you will need a new one if it is smooth then someone is trying to rip you off by earning more moneyIn brake replacement, The mechanic told me that both the rotors and pad need to change?No, you probably just need pads. I had a shop try to sell me a $800 brake job with new rotors, calipers and pads. Said I need it all or they can't guarantee the work. I told them to stuff it and went home and did it myself. The rotors didn't even need to be turned. Nothing was wrong with the calipers and I still had a little pad left. Changed the pad and I was good. Only reason I had my truck at the shop was for tires. Funny, if they knew I was a mechanic, I wonder if they'd have still fed me that line of BS.In brake replacement, The mechanic told me that both the rotors and pad need to change?Well, you might as well change the pads and rotors at the same time, so theirs no uneven wear, instead of having to do the pads on the front now, then replace the front rotors in a month with somewhat worn out front pads....it'll be a hassle. Trust me, replace them all at once.In brake replacement, The mechanic told me that both the rotors and pad need to change?As a mechanic myself I would recomend you take the mileage of the car and equat it to the rotors, i got 60,000 out of a set of pads, and use the rotors a second round, but on the 3rd round those shiny rotors are getting pretty thin, so if your car has around 90,000 on it, your rotors are too thin to last the life of anopther costly brake job. Have a second opinion if you think he is out to rook ya.In brake replacement, The mechanic told me that both the rotors and pad need to change?Rotors should be replaced is they are warped or if they are heavily scored. A new rotor can be cut to remove grooves or warping up to 12 thousand of an inch. If done properly, a rotor could be cut 2 thousand at the time. But most shops, to avoid having customer complaints about posible brake pulsation, they cut between 6-10 thosand the first time. The second time you need to change brakes, the new shop will not accept cutting them, because they are too close to the max.In brake replacement, The mechanic told me that both the rotors and pad need to change?take it to a place where they will do as you ask.

    i had the same problem recently and they are all ways after more money.

    i was also trained as a mechanic but got out of the game because it means ripping people of on a regular basis.In brake replacement, The mechanic told me that both the rotors and pad need to change?Rotors have a minimum thickness, if they get down to this limit they won't work effectively and could cause brake failure = crash.

    Whenever you replace your disc pads, you should get the rotors machined or replaced if they are unable to be machined within the limits. If they don't get machined you stand a chance of them squealing and also don't get the best brakes possible. Machining gets rid of the shiny surface on the disc which stops the new pads working properly.

    Some disc rotors can't be machined because of how they are made or because of the manufacturers requirements.

    If you have gone metal to metal, which is what it sounds like, you have a rough uneven surface which will cause the new pads to wear unnecessarily and not perform to their best.



    In a nutshell by the what you've described it, you've worn out the pads, which has scored the discs making them thinner than the manufacturer requires.

    Just because they look alright doesn't mean they are safe, get a second opinion if you feel they are trying to pull a swifty, but make sure the person you take it to knows what they are doing. These are your brakes, without them you crash, don't cut corners by demanding dodgy repairs, if they need replacing, replace them.

    How to change brake pads on 2004 chevy avalanch?

    Jessy, I'm going to save you some trouble by suggesting some tools you'll need to remove the brake calipers. Go to Sears and buy a set of shallow-well metric 1/2%26quot; sockets. It's easiest if you have a 16%26quot; 1/2 ratchet or a 16%26quot; 1/2 drive breaker bar. Walk over to the wood working counter and pick up a Jorgenson slider clamp to compress the caliper pistons.



    Go to any auto-parts store (NAPA) and pick up a tube of synthetic brake grease to lubricate the caliper slider pins. Don't go cheap with the brake pads. Pick up AC-Delco, Bendix CQ.3 or EBC Red ceramic brake pads.



    Jack the truck up after loosening the lug nuts, one wheel at a time. Turn the steering wheel to expose as much of the brake caliper as possible. Remove the metric caliper bolts. Compress the caliper piston by bridging the rear of the caliper and squeeze through the opening on the street side brake pad. The caliper will pull straight up off the wheel spindle. Grease the slider pins. Replace the brake pads and re-install.



    Forget investing in any 3/8 tools for this job as they don't don't have the necessary leverage and don't hack the mission.

    Changing brake pads on 2001 mitsubishi eclipse?

    I am going to change brakes on my eclipse this weekend. I have a few questions.



    1) For rear brakes Do i need special tool to depress piston/

    2) Do i have to remove the cap of brake fluid tank?

    3) Whats the best place to buy brakes?Changing brake pads on 2001 mitsubishi eclipse?1-if your car has ratcheting type rear calipers then yes you need a special tool.napa sells it.its a universal one.its cheap though.

    2-when compressing the calipers the brake fluid will return back to the master cylinder and could over flow/spill out.so your best bet is to pop the hood and take the cover off the master cylinder and see if its full or low.it should be low if the pads are worn and you never put fluid in the master cylinder.so then your safe of not have to drain any out.as for pads,your best bet is to call all local parts stores and get prices.oh and heres a helpful hint if you need to drain some brake fluid out.use an old dish soap bottle to suck out the fluid.it usually works good.Changing brake pads on 2001 mitsubishi eclipse?Yes you need a %26quot;C%26quot; clamp to compress the piston, yes you need to remove the cap on the brake fluid(compressing the piston force the fluid back to the reservoir) and go to Advance, Auto Zone, NAPA, Nationwise, etc. for your pads.Changing brake pads on 2001 mitsubishi eclipse?1) not sure on a mitsubishi, but try compressing the piston with a set of large channel lock pliers, or a C-clamp on the inboard pad. if it doesn't ga in very easily, you may need to rotate the piston as you push it in.



    2) Technically, yes. You are supposed to remove the cap, and using a turkey baster, remove about half of the brake fluid in the resevoir. Doing this will avoid overflowing the resevoir when you compress the pistons on the calipers.



    3) the best place is the dealer. They have the original parts. Not the cheapest though. You may consider someplace like AutoZone or Murray's that have a lifetime warranty on their brake pads. That's what I do but that is only because my car eats brake pads. Brake late, and carry alot of speed through the corners!!

    How much can i expect to pay for changing brake pads?

    I am driving a PT cruiser, and recently the brakes started screeching when ever i start driving, but interestingly enough only for the first couple stops, after braking a couple times it goes away.



    I am pretty sure i need to get new brake pads at least. But i was wonder how much am i expected to pay?How much can i expect to pay for changing brake pads?If the noise goes away, you could have glazed pads that are squeaking. Some pads glaze over due to hard stopping and slowing from high speeds. For your peace of mind, I suggest you have them inspected, Some shops provide free inspections and will give you an estimate for you to consider. Prices range from $69.00 per axle and go up from there. If rotors and callipers are in good condition, usually under $100.00.How much can i expect to pay for changing brake pads?100 dollars,How much can i expect to pay for changing brake pads?Any where from 40 to 100 plus dollars. If you do not do it your self you will be charged 60 dollars an 1/2 and hour for labor.How much can i expect to pay for changing brake pads?pads are about 20 dollars.depends on which ones....if a shop does it 100 dollars an axel...hope you havent wrecked rotorsHow much can i expect to pay for changing brake pads?well for pads they run around 60 bucks per axle and if there grinding metal to metal then your going to need to replace your rotors and thats going to cost more about 75 bucks or more for each rotor but if there not grinding you can just get the rotors machined for 10 bucks a peice and i would recamend a brake flush to keep things flowing like they should well i hope i was of some asistanceHow much can i expect to pay for changing brake pads?starting price is around 100 bucksand up depending on how bad they are... so smart way is to make three calls and ask local shops...something you can do at home cheaper if you learn how.... 30 minute or less for each side about a good hour and a half for all four you can call the parts store and ask how much pads are and new rotors and get a price on aprts but thats just a wild guess at how much one would charge that will vary between shopsHow much can i expect to pay for changing brake pads?cheap cold pads do squeak as they wear down and become harder. Many manufactures make %26quot;anti squeak%26quot; compounds that go on the back of the pad (it is vibration causing the sound). check how much pad you have left before deciding %26quot;worn out%26quot; is the problem.



    Something as simple as just %26quot;pads%26quot; I would go to one of those franchise brake specialist companys...just DO NOT let them up-sell you anything...take th 89.99 deal installed and not a thing more.How much can i expect to pay for changing brake pads?as long as you don't need new rotors or calipers Midas advertises new brake pads and labor for $79.95 per axle.

    Change Astra Brake Pads - How easy?

    Hi there, I need to replace JUST the brake pads on the rear of my Astra G Coupe. How easy is it to do - do I need any special tools?



    Thanks in advance for your replies ;-)Change Astra Brake Pads - How easy?You will need a special tool to wind the pistons back to accept the new pads.

    It is a easy job to do, but if you've never done it before and are unsure how to do it take it to a garage the brakes could save you life one day.Change Astra Brake Pads - How easy?Oh dear please don't mess about with the brakes on your car if you do not know what you are doing. Take it to halfords etc etc. When you are in hospital because you smacked into a bus because your brakes did not work you will be pleased you saved yourself a few quid. NOTChange Astra Brake Pads - How easy?very easy if u no wot u doinChange Astra Brake Pads - How easy?it depends on the type of brake caliper pistons that are fitted onto the rear of your car, some are the wind in type which need special tools and some are just push ins. if you are asking this question i would take it to kwik fit or a mechanic to have them done, its not just as simple as changing the pads, theres the bleeding thats involved too, if you dont bleed them properly in the correct sequence you will end up with spongy defective brakes.Change Astra Brake Pads - How easy?I aggree with many answers on this one. I have been a technician for more than 40 years and I really have to say %26quot;If you have to ask on a forum like this then you do not have the ability to do this properly%26quot;



    Have it done in the local garage they should charge you no more than an hour labour and their standard rate plus the VAT. They are more likely to do it properly and certainly better than you can



    Sorry to sound a bit harsh but I use the road as well and I want to remain safe from the DIY mechanicChange Astra Brake Pads - How easy?impossible to answer regretfully...as you and nobody knows what state they are in...why have the hassle...get the mechanic to do it...then its done right and hassle freeChange Astra Brake Pads - How easy?Hi there i am presuming that your in the uk if so i would agree with the other answers in that if you have no or little experiance take the car to a garage as a human life (or lives) dont compare to the amount of money you will save, over the yrs i have seen some horrendous crashes due to poorly maintained brakes and other poor repairsChange Astra Brake Pads - How easy?Very straight forward if you know what your doing....If you dont you could get in all sorts of trouble and put yours and others life at risk! Take it to a garage its not a big job and a small price to pay for the sake of everyones safety.
  • transfer file
  • asian hair
  •