Tuesday, October 25, 2011

Is there any online information on how to change break pads?

online information or diagrams on how to change brake pads and turn rotars on a 1995 pontiac sunfire also any information on how to change the spark plugs and spark plug wires on a pontiac sunfire 1995 ? the engine is quite awkward the plugs and wires seem to be hard to locate and reachIs there any online information on how to change break pads?Go to www.advanceautoparts.comand look under %26quot;know how articles%26quot;.Is there any online information on how to change break pads?Spend the $20 %26amp; buy a Haynes or Chilton manual for you vehicle. It's money well spent %26amp; you will have it for future reference.

_ _ _Is there any online information on how to change break pads?I can change your brake pads. ^_^ I've done the procedure hundreds of times.Is there any online information on how to change break pads?http://www.autozone.com/addVehicleId,199





good luck...Is there any online information on how to change break pads?Oh man it is easy to do. Once you do one it becomes clear how to do others atleast for disk brakes. I pressume that is what you have wince you spoke of turning rotors.



Go online do a search for changing brake pads or join a forum for your vehicle.Is there any online information on how to change break pads?First things first.



The article I'm giving you is a general how-to on how to do your brake pads. Turning your rotors is something you can't do at home. You need to take the rotors (which should come off in the process of changing the brake pads) to a shop and ask them IF they can be turned (if they have been turned before or if they are warped, you may not be able to turn them).



As for the plugs and wires, just follow your plug wires to the end, and voila! There are the plugs. Do those one at a time, and make sure you gap your plugs to the recommended gap. If you don't know the proper gap, you can ask your local parts guy for the proper gap, or look at the manufacturers label under the hood. Somewhere on there is a proper gap setting.



That being said, it is easier to go down to your parts place and get a Chilton's or Haynes manual. It will have the proper procedure to do both jobs, along with other handy tips to keep your car going.Is there any online information on how to change break pads?Whats to know? To change the brake pads, remove the wheel, un-bolt the caliper (just 2 bolts), lift it off, push in the caliper piston, remove old pads, insert new pads (after lubing them appropriately) and re-install. Same as just about any pad slap on any car. Litterally after removing the wheel there are only 2 bolts to deal with.



The spark plugs and wires are also no big wup either. Just remove the top cover off the engine and everything is right there. If its a 2.4 DOHC (Quad 4) engine it will not have spark plug wires but rather hard boots that are built right into the cover. These are a frequent source of problems and should be replaced at the same time as the plugs.



If its a 2.2 engine you might as well replace that leaking valve cover gasket as long as you are in there. That's easy too, something like 11 or 12 bolts and she comes right out.
  • web hosting domains
  • connect hdd to pc
  •